KEHIPI Dual Band WiFi Antenna 2.4GHz 5.8GHz 3dBi RP-SMA Male 2-Pack + 12 inch u.fl Cable
Dual-band 2.4 GHz and 5.8 GHz antennas with 3 dBi gain, RP-SMA male connectors and two 12-inch u.fl cables for routers or PCIe cards
Model Antenna for Mini Pcie Card
- Dual-band coverage from 2.4 GHz to 5.8 GHz for wider compatibility
- 3 dBi gain boosts signal strength on routers and adapters
- RP-SMA male plug fits female sockets on PCIe cards and industrial gear
- Omni-directional pattern sends signal evenly in all directions
- Includes two 12-inch U.FL cables for flexible internal routing
Dual-band 3 dBi antennas
This dual-band antenna set covers 2.4 GHz (2400-2485 MHz) and 5.8 GHz (5150-5850 MHz) with 3 dBi gain. Each unit uses an SMA male connector and includes a 12 inch u.fl to RP-SMA cable. The omni-directional pattern suits routers, PCIe network cards and industrial IoT gateways.
Suits SMA-female ports only
Builders with SMA female jacks on routers, mini PCIe adapters or FPV video gear can attach these directly. The package also supports 2.4 GHz Bluetooth audio devices. Buyers needing N-type, TNC or reverse-polarity SMA connectors should look at something else because the plug geometry will not mate.
3 dBi gain decides range
The 3 dBi figure determines how much signal focus the antenna adds over a bare connector. Higher-gain units would narrow the vertical beam, while lower-gain models radiate more broadly. Check your link budget and mounting height to confirm this gain level matches the coverage you need.
How it compares
Measured against everything we stock in Wi-Fi Antennas & Wireless Bridges, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 91% of the 399 comparable items (median $31.99).
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
KEHIPI Dual Band Network Antenna 2.4GHz 5.8GHz 3dBi SMA Male 2-Pack with 12 inch IPEX4 Cables
Questions about this item
How do I install the RP-SMA male antennas onto my device, and what is the common mistake?
Screw each SMA male plug into a matching SMA female jack until finger-tight; the common mistake is forcing an RP-SMA connector onto a standard SMA jack, which have opposite pin arrangements.
What maintenance or replacement will the antennas and u.fl cables need over time?
Inspect the 12-inch u.fl cables for kinks or loose crimps and check the antenna housings for cracks; replace any cable or antenna showing physical damage or degraded VSWR.
What is the first performance limit reached under sustained high-power transmission?
The VSWR limit of < 2.0 is the first constraint; exceeding it causes reflected power and heating, so keep transmit power within the antenna's 50-ohm design envelope.
More in Wi-Fi Antennas & Wireless Bridges
Similar items
Ubiquiti Networks NSM5(US) 5.0 GHz network antenna
- 2 × 10/100 Ethernet…
- 5.0 GHz
Vszerda BFN00624 RP-SMA Dual Band 3dBi Antennas 2-Pack White
- Rp-SMA antenna 2-Pa…
- [Rp-SMA] Male anten…
DELL Optiplex Antenna ANT-D7 Adapter Assembly KIT DFCV1 97PD5 0GJRH7 A00 2042
- Adapter Assembly KIT
- Black
YOUHUA Dual Band WiFi Antenna 2.4 5.8 GHz 8dBi SMA 2-Pack
- Bluetooth Adapter










