We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three small green circuit boards with USB-C ports

KEHIPI

KEHIPI PD65W USB charger module 3 pack 65W 20V 21V PD3.1 QC3.0 SCP PPS

SKU CH-BGWR-21DEQ

Three DC-to-USB-C modules deliver up to 65 W with PD3.1, QC3.0, SCP and PPS, auto-adjusting 3.3 V–21 V from 8 V–32 V input

  • Output voltage21 V
  • Supported voltage20 V
  • Product colorStandard Board
  • 65 W peak output charges laptops and phones fast
  • PD 3.1, QC 3.0, SCP and PPS cover most USB-C devices
  • 92 % to 97 % conversion efficiency reduces heat loss
  • Input accepts 8 V to 32 V DC for flexible power sources
  • Built-in over-current, over-temperature and short-circuit protection

Three-module pack for custom USB-C power projects

This pack contains three identical PD65W charger modules built around a USB-C interface. Each board accepts a DC input between 8 and 32 volts and delivers up to 65 watts through supported fast-charging protocols. Makers, integrators and repair technicians can embed them in portable power banks, bench supplies or device-specific chargers where a compact, programmable power stage is required.

Drops into any 8–32 V DC source

The modules automatically adjust their output between 3.3 and 21 volts when a compatible Type-C device is attached, provided the input voltage exceeds the desired output. To trigger the 20 volt 3.25 ampere profile the supply must be higher than 20 volts. Built-in protections cover input over-voltage, under-voltage and over-current, plus output over-current, short-circuit and whole-unit over-temperature shutdown, freeing the designer from adding discrete protection circuitry.

Sustained 65 W delivery

Under a continuous 65 watt load from a 24 volt source at 24 °C ambient, the board maintains its rated output while keeping temperature rise and voltage ripple within the tested limits. Efficiency stays between 92 and 97 percent across the operating range, reducing heat that would otherwise require bulky heatsinks in enclosed projects. The three-board pack lets builders populate multiple outputs or keep spares for iterative prototyping.

How it compares

Measured against everything we stock in Multi-Port USB Chargers, at today’s prices. Recalculated every night.

Price $14.99
Cheaper than about 83% of the 1,426 comparable items (median $24.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameAITRIP
Model namePD65 W
Product colorStandard Board
Power
Output voltage21 V
Supported voltage20 V

Questions about this item

What is the maximum sustained output this module can deliver before its over-temperature protection activates?

The module is rated for 65 W maximum output and includes whole-machine over-temperature protection that will limit power if the board overheats during continuous use.

How much heat and noise should I expect when running the module at full load all day?

Conversion efficiency of 92–97 % means only 2–5 W is lost as heat; with no fan the board runs silently, though the PCB will become warm to the touch at 65 W.

What power source must I already have to trigger 20 V fast charging on this module?

A DC supply of 20 V or higher (up to 32 V) connected to the input terminals is required for the board to negotiate 20 V / 3.25 A output over its USB-C port.

More in Multi-Port USB Chargers

Similar items