We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Keyence OP-87906 I/O cable for IV-G vision sensor

Keyence

Keyence OP-87906 I/O cable for IV-G vision sensor

SKU CH-KH7R-G51P0

Connects IV-G vision sensors to external I/O devices for system integration

  • Product typeAccessories
  • Ready-to-connect I/O cable for IV-G vision sensor
  • Keyence OP-87906 accessory integrates directly with sensor system
  • New condition ensures reliable out-of-the-box performance
  • Purpose-built design simplifies vision sensor installation
  • First listed by manufacturer March 2024

Keyence OP-87906 I/O cable for IV-G vision sensor

This accessory provides the electrical link between a Keyence IV-G vision sensor and the host controller or PLC. It is intended for engineers integrating machine-vision inspection into automated production lines.

Accessory type defines compatibility

The part is classified as an Accessories type component, meaning it functions solely as the dedicated I/O interconnect for the IV-G series. No other sensor family or interface standard is supported by this cable.

Fits directly into IV-G sensor ports

The cable plugs into the native I/O connector on the IV-G unit, requiring no adapters or additional terminal blocks. It frees the installer from sourcing custom wiring looms and ensures the pin-out matches the sensor’s factory specification.

How it compares

Measured against everything we stock in Sensors, Transducers & Thermometers, at today’s prices. Recalculated every night.

Price $245.99
Pricier than about 80% of the 255 comparable items (median $39.99).

Specifications

Product
Product typeAccessories

Questions about this item

How does the 5 m cable length work inside a machine vision setup?

A 5 m I/O cable lets you route power and trigger signals from the IV-G sensor to a controller or PLC across a typical cell without needing an extension.

What signals does the I/O interface carry in practice?

The cable connects the sensor's discrete I/O pins — power, trigger, strobe and programmable outputs — so the vision system can synchronise with external lighting and PLC logic.

What clearance does the connector need to mount on the IV-G sensor?

The moulded connector seats directly into the sensor's I/O port; allow enough depth behind the camera for the strain-relief boot and cable bend radius.

More in Sensors, Transducers & Thermometers

Similar items