We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey iron 90-degree conduit elbow, half-inch threaded ends, powder-coated finish

Killark

Killark BL-90-1MWW IMC 90 Deg Elbow 1/2 in Threaded Iron Powder Coated Conduit

SKU CH-DSA8-PETE7

A 90-degree threaded elbow connects 1/2-inch IMC conduit with iron construction and powder-coated finish for hazardous locations

  • Product typeCable Management & Conduit
  • 90-degree turn routes conduit smoothly
  • 1/2-inch threaded ends connect IMC or RMC
  • Iron body with powder coat resists corrosion
  • Rated for Class I Div 1 & 2 hazardous areas
  • Weighs 0.31 lb for easy handling

Application and purpose

This powder-coated iron elbow joins two sections of IMC conduit at a 90-degree angle. The 1/2-inch threaded ends connect female to male NPT threads for a secure fit in hazardous-location wiring systems.

Critical specification

The fitting carries a hazardous-location rating for Class I Division 1 and 2 Groups C and D, Class II Division 1 and 2 Groups E F and G, and Class III Division 1 and 2, making it suitable for environments where flammable gases, combustible dust or ignitable fibres may be present.

Physical profile

Overall length measures 2 1/4 inches with a height of 3 inches and a width of 2 inches. The iron body weighs .31 lb and the powder-coated finish resists corrosion in demanding industrial installations.

How it compares

Measured against everything we stock in Electrical Conduit & Fittings, at today’s prices. Recalculated every night.

Price $28.99
Typical for this category: the median of 1,290 items is $28.99.

Specifications

Product
Brand nameHUBBELL KILLARK
Product typeCable Management & Conduit

Questions about this item

What does the 90-degree bend mean for cable routing inside a panel?

The 90-degree elbow redirects IMC or threaded rigid conduit at a right angle, letting you turn a run into a box or around an obstruction without bending the pipe itself.

What do the Class I Division 1 and Class II Division 1 ratings cap in practice?

They certify the fitting for use where flammable gases, vapours or combustible dusts are present under normal conditions, so the conduit system stays sealed in those hazardous areas.

What clearance does the 2 1/4 in overall length and 3 in height need for mounting?

You need at least 2 1/4 inches of straight run plus 3 inches of vertical space to thread the female end onto conduit and the male end into a box or hub.

More in Electrical Conduit & Fittings

Similar items