We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small rectangular PoE splitters with USB-C and Ethernet ports

KINGARD

KINGARD 2-Pack 5V Gigabit PoE Splitter USB-C 48V to 5V 2.4A IEEE 802.3af

SKU CH-TGH6-7DDJP

Splits PoE into 5V 2.4A USB-C power and gigabit Ethernet for non-PoE devices, IEEE 802.3af compliant, two-pack

  • Product typeUSB Wi-FI Adapter
  • Powers USB-C devices from PoE with 5 V 2.4 A output
  • Delivers 10/100/1000 Mbps Ethernet data alongside power
  • Works straight from a PoE switch or injector with no setup needed
  • Supports non-PoE gear that needs 5 V DC via USB-C and Ethernet
  • Two splitters included for multiple device deployments

Gigabit PoE Splitter 2-Pack

This two-pack supplies 5V DC power and gigabit Ethernet data to devices that lack native Power over Ethernet support. Each splitter draws 44-56V from a PoE switch or injector and delivers up to 2.4A at 12 watts maximum through a USB-C connector while passing 10/100/1000Mbps network traffic. The units are compliant with IEEE 802.3af and require no configuration for immediate operation.

Check PoE Source and Device Ports

Verify that your PoE switch or injector provides standard IEEE 802.3af power within the 44-56V DC input range before connecting. The target device must accept 5V DC input via a USB-C port and have a separate Ethernet jack for the data connection. Ensure the device’s power draw does not exceed the 12-watt output limit of the splitter.

Suits USB-C Devices Without PoE

Ideal for adding network connectivity to IP cameras, access points, or IoT hardware that need 5V USB-C power and wired Ethernet where no mains outlet exists. Not suitable for devices requiring higher voltage or wattage, those using barrel-jack or micro-USB power inputs, or equipment that demands PoE+ or passive PoE standards beyond 802.3af.

How it compares

Measured against everything we stock in Wi-Fi Cards & USB Adapters, at today’s prices. Recalculated every night.

Price $27.99
Pricier than about 68% of the 1,565 comparable items (median $18.99).

Specifications

Product
Product typeUSB Wi-FI Adapter

Questions about this item

Does the 2-pack include everything needed to power a USB-C device from a PoE switch, or must I buy injectors or cables separately?

The box contains two splitters that each deliver 5V 2.4A over USB-C and pass 10/100/1000Mbps data; you still need a PoE switch or injector supplying 44-56V and standard Ethernet cables.

Both units are identical 5V 2.4A models, so there is no capacity choice — what should I check to ensure compatibility?

Verify your device accepts 5V DC via USB-C and has a separate Ethernet port; the splitter follows IEEE 802.3af so any compliant 48V source will work.

The headline says 12 watts maximum — what does that mean for a Raspberry Pi or IP camera in daily use?

It provides up to 5V 2.4A (12W) from a PoE switch, enough for most Pi models and many cameras, while the Gigabit port carries full 1000Mbps data simultaneously.

More in Wi-Fi Cards & USB Adapters

Similar items