We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips and gold edge contacts

Kingston Technology Corp.

Kingston Technology Corp. KTH-PL316LV/8G 8GB DDR3 1600 ECC Registered CL11 1.35V memory upgrade

SKU CH-SG96-V1613 MPN KTH-PL316LV/8G

8GB DDR3 1600 ECC registered module at 1.35 V with CL11 latency for servers

  • Total capacity8 GB
  • Rated speedDDR3 1600 (PC3 12800)
  • CAS latencyCL11
  • Rated voltage1.35 V
  • Buffer typeRegistered
  • ECC Registered design protects data integrity in server workloads
  • DDR3 1600 speed delivers 12800 MB/s bandwidth for demanding tasks
  • Low 1.35V operation reduces power draw and heat output
  • CL11 latency ensures responsive performance under load
  • 8GB capacity expands memory for virtualisation and databases

8GB DDR3 ECC registered module

This 8 GB DDR3 module runs at 1600 MT/s with a CAS latency of 11 and operates at 1.35 V. It includes error-correcting code and registered buffering for data integrity in server workloads. The part is designed for systems that specifically require registered ECC memory.

Registered design and low-voltage operation

The registered architecture places a register between the DRAM and the memory controller to reduce electrical load on the bus. Combined with the 1.35 V supply, this helps maintain signal stability in densely populated memory configurations. The module uses a standard 240-pin DIMM edge connector for DDR3 slots.

Verify registered ECC support before ordering

Check that your motherboard or server platform explicitly supports registered ECC DDR3 memory and accepts 1.35 V modules. Systems that require unbuffered non-ECC DIMMs or a different voltage will not be compatible. Confirm the maximum supported capacity per slot and total system limit in the platform documentation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $55.99
Cheaper than about 76% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $7.00 per GB
Cheaper than about 57% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameKingston
Model nameKTH-PL316LV/8G
Total capacity8 GB
Performance
Rated speedDDR3 1600 (PC3 12800)
Memory
CAS latencyCL11
ECC supportYes
Buffer typeRegistered
Power
Rated voltage1.35 V
Size & build
Shipping weight0.03 kg
Package size146 × 46 × 9 mm

Questions about this item

Does the DDR3 1600 (PC3 12800) interface cap real-world throughput below the rated speed?

The module runs at DDR3 1600 with CL11 timing; actual throughput depends on the server chipset and memory controller, not the DIMM alone.

What physical slot and clearance does the KTH-PL316LV/8G require?

It uses a standard 240-pin DDR3 DIMM slot; the registered design adds a buffer chip, so verify the motherboard supports registered memory before installing.

What installation step is often missed with this registered ECC module?

The server must support registered ECC DDR3 at 1.35V; if the BIOS defaults to 1.5V, the system may fail to post until the voltage is set correctly.

More in Model-Specific Memory Upgrades

Similar items