We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten chrome-plated brass angle stop valves with compression fittings

KISSLER AND CO., INC.

KISSLER AND CO., INC. Angle Stop Valve Brass Compression PK10 88-9215

SKU CH-PDRD-XQ3ZR

Pack of ten brass angle-stop valves with 1/4-turn handles and compression fittings rated to 250 psi

  • Product typeSingle Hole Faucets
  • Quarter-turn handle enables fast water shut-off
  • Brass body with chrome plating resists corrosion
  • Dual compression fittings suit 5/8 in and 3/8 in supply lines
  • Rated for 250 psi maximum operating pressure
  • Pack of ten valves covers multiple installation points

10-Pack Angle Stop Valves

These brass compression valves control water flow to fixtures with a quarter-turn handle. Each unit features a chrome-plated finish and two female compression connections measuring 5/8 inch and 3/8 inch. The pack contains ten identical valves for multiple installation points.

Suited for standard supply-line shut-offs

Installers fitting compression supply lines to toilets, sinks or appliances will find the required connection sizes and 250 psi pressure rating. Projects that need push-fit, sweat or threaded connections, or a different port diameter, will require alternative valve types.

Dual compression ports: 5/8 in and 3/8 in

The inlet accepts a 5/8 inch compression nut while the outlet takes a 3/8 inch compression nut, both female. This specific port pairing determines whether the valve matches the existing supply tubing and fixture risers on the job.

How it compares

Measured against everything we stock in Bathroom Sink Faucets, at today’s prices. Recalculated every night.

Price $63.99
Cheaper than about 64% of the 268 comparable items (median $117.49).

Specifications

Product
Brand nameKISSLER & CO
Product typeSingle Hole Faucets

Questions about this item

How often should the compression fittings on the 88-9215 angle stop valves be checked or replaced?

Inspect the 5/8 in and 3/8 in compression connections periodically for drips; replace the brass ferrules if corrosion or persistent seepage appears after re-tightening.

What is the maximum continuous pressure the 88-9215 brass valve body can handle before leaking?

The valve is rated for 250 psi operating pressure; sustained pressure above that level will exceed the design limit and risk seal failure.

Does the 1/4-turn handle on the PK10 valves generate noticeable vibration or heat during all-day water flow?

The quarter-turn ceramic disc operates without vibration; brass body and chrome finish dissipate heat so the valve stays near water temperature during continuous use.

More in Bathroom Sink Faucets

Similar items