We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White USB to DC 3.5mm × 1.35mm charger cord, male-to-male, coiled cable, single pack

Kisumi USB to DC 3.5mm × 1.35mm charger cord White 1 Pack

SKU CH-JYGC-FMCKE

USB-to-DC cable with a 3.5 mm × 1.35 mm plug powers compatible Bitvae, Fairywill, Vekkia, Mornwell, SEAGO and other toothbrushes or flossers from any USB source

  • Compatible phone brandsNo Compatible Phone Models
  • Compatible phone modelsNo Compatible Phone Models, Toothbrushes
  • Adapter connector2-pin
  • HDMI connection2-pin
  • Max output power10 W
  • Output voltage5 V
  • Wide compatibility with Bitvae toothbrushes and flossers
  • Works with many Fairywill sonic models including D1 and E10
  • Fits Vekkia, Mornwell, SEAGO and other brands
  • USB to DC 3.5mm × 1.35mm plug for power banks
  • 5 V output rated at 10 W maximum power

Kisumi USB to DC charger cord for Bitvae

This white charger cord replaces the original cable for Bitvae D2, R1, R2, S2 electric toothbrushes and C2, C5, C6 water flossers. It also fits Fairywill sonic toothbrush models including D1, D3, D7, D8, E6, E10, E11, P11, P80, FW-507, FW-508, FW-917, SG-508, TB-507, TB-508 and the 2001 Kids model. The USB to DC 3.5mm × 1.35mm connector works with standard USB power sources.

Check your device model

The cable is not compatible with all water flossers or electric toothbrushes. It will not work with unlisted brands or models such as Vekkia, Mornwell, SEAGO, Dnsly, Kipozi, Gloridea, Initio or ATMOKO unless the specific model matches the listed compatibility. Verify that your device uses a DC 3.5mm × 1.35mm input port. The cord delivers a maximum output of 10W at 5V from any USB power adapter or power bank.

Steady 5V 10W output during daily charging cycles

The cord maintains a consistent 5V supply at up to 10W while the toothbrush or flosser battery recharges. There is no burst or fast-charge mode described; the power delivery stays level throughout the charging session. The 2-pin male-to-male design connects directly between the USB source and the device without intermediate electronics.

How it compares

Measured against everything we stock in Charging Stations & Cables, at today’s prices. Recalculated every night.

Price $14.99
Cheaper than about 70% of the 9,983 comparable items (median $18.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameKisumi
Model nameNo Compatible Phone Models, Toothbrushes
Product colorWhite
Ports & slots
Adapter connector2-pin
HDMI connection2-pin
Power
Max output power10 W
Output voltage5 V
Supported voltage5 V DC
Size & build
Conductor gaugeRechargeable
Compatibility
Compatible phone brandsNo Compatible Phone Models
Compatible phone modelsNo Compatible Phone Models, Toothbrushes

Questions about this item

What comes in the box and do I need a separate power adapter?

The pack contains one white USB to DC 3.5mm × 1.35mm cable; plug it into any USB power source you already own.

Which version should I choose for a Fairywill D1 or FW-507 toothbrush?

This single cable fits Fairywill D1, D3, D7, D8, E6, E10, E11, P11, P80, FW-507, FW-508, FW-917, SG-508, TB-507, TB-508 and the 2001 Kids model.

What does the 10W rating mean when I charge my Bitvae R2?

The cable delivers up to 10W at 5V from any USB port, matching the toothbrush’s original charger speed.

More in Charging Stations & Cables

Similar items