XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 2.5 inch 512GB SATA internal SSD with 3D NAND TLC and DRAM cache delivering up to 540 MBps read and 500 MBps write speeds
The KLEVV NEO N410+ is a 2.5 inch internal solid state drive built for consumer desktops and laptops. It uses 3D NAND TLC memory and a SMI SM2259XT2 controller with DRAM cache. The drive connects through a standard SATA III interface.
Maximum sequential read reaches 540 MBps and maximum sequential write reaches 500 MBps. These figures define whether the drive can saturate the SATA III link in typical workloads. The rated endurance is 200TB written.
The 7mm height and 35g weight allow fitment in standard 2.5 inch bays without extra brackets. With no moving parts the drive runs silently and draws little power during typical read and write activity.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | KLEVV |
| Model name | NEO N410+ |
| Part number | K512GSSDS3-N41 |
| Total capacity | 512 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 540 MB/s |
| Sequential write speed | Up to 500 MB/s |
| Storage | |
| NAND flash type | 3D NAND TLC |
| Controller chip | SMI SM2259XT2 |
| Cache memory | DRAM |
| Write endurance | 200 TB |
| Connectivity | |
| Connection protocol | SATA |
| Ports & slots | |
| Interface type | SATA III |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 7 mm |
| Overall width | 69.85 mm |
| Product depth | 100.2 mm |
| Product weight | 35g |
| Shipping weight | 0.09 kg |
| Package size | 152 × 124 × 22 mm |
The 540 MBps read and 500 MBps write speeds are the maximum sequential rates the SMI SM2259XT2 controller can sustain over the SATA link, so large file copies and game loads will approach those numbers.
SATA III provides a 6 Gbps link, and this drive reaches up to 540 MBps read and 500 MBps write, which is the practical ceiling for the interface.
The drive measures 100.2 mm long, 69.85 mm wide and 7 mm high, weighing 35 g, so it fits any standard 2.5-inch bay or caddy with SATA data and power connectors.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?