We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular steel frame 18 by 24 inches with black bobbin net and 9.5 mm mounting pin

Kupo

Kupo 18x24" Open End Flag Frame Single Black Bobbin Net 9.5 mm Pin

SKU CH-28WC-C4TC9

An 18 by 24 inch open-end flag frame with single black bobbin net and 9.5 mm mounting pin for precise light control

  • Targeted light shaping with 18x24" open-end flag
  • Robust steel frame withstands demanding studio use
  • Lightweight design simplifies studio and location transport
  • Single black bobbin net secures flag material
  • 5 mm welded pin mounts to grip heads

Precise Light Control

The 18x24" open-end flag frame lets photographers and videographers shape natural or artificial light with accuracy. Its single black bobbin net reduces unwanted spill while adding depth to subjects. The design suits both studio work and on-location shoots where quick light modification is needed.

Thermals Noise Power Draw

As a passive lighting accessory the frame generates no heat, emits no sound and draws no electrical power during use. Operation remains completely silent and thermally neutral in any environment. There are no moving parts or electronics to create noise or consume energy.

Sustained Load Behaviour

The welded 9.5 mm mounting pin and robust steel construction maintain alignment during long shooting sessions. The open-end design allows rapid flag changes without degrading the frame’s structural integrity. Performance stays consistent whether the unit is clamped to a C-stand for hours or repositioned repeatedly.

How it compares

Measured against everything we stock in Photo Lighting & Studio Flashes, at today’s prices. Recalculated every night.

Price $41.99
Cheaper than about 65% of the 3,696 comparable items (median $57.99).

Specifications

No published specifications for this item yet.

Questions about this item

How do I mount the 18x24" open-end flag frame on a C-stand?

Insert the welded 9.5 mm steel pin into a grip head or gobo arm on the C-stand, then tighten the grip head's locking knob to secure the frame at the desired angle.

What part of the single black bobbin net will need replacement first?

The bobbin net fabric will eventually fray or tear from repeated handling and tension; the steel frame and welded pin are far more durable and rarely require service.

What limits how long I can leave this flag frame under hot studio lights?

The black bobbin net absorbs heat and can scorch or degrade after extended exposure to high-output fixtures, so monitor the fabric temperature during long sessions.

More in Photo Lighting & Studio Flashes

Similar items