We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 40 inch steel extension arm with big T-handle grip head

Kupo

Kupo 40" Extension Grip Arm Big Handle Silver

SKU CH-DJHK-V1DG4

A 40 inch steel grip arm with a 2 1/2 inch grip head and oversized handle for secure mounting of lighting accessories

  • 40 inch reach positions lights exactly where needed
  • Machined rough texture on steel tubing prevents slipping
  • Four V-jaw sizes accept 16, 1/2, 3/8 and 1/4 inch studs
  • Oversized T-handle with roller bearings delivers maximum torque
  • Aluminium friction disc and steel central bolt ensure durable locking

40" Grip Arm for Studio Lighting

The Kupo 40" Extension Grip Arm provides a sturdy steel tube with a machined non-slip surface and a 2-1/2 inch grip head. It is designed for photographers and videographers who need to position lights, flags or modifiers at a distance from the stand. The oversized T-handle and roller bearings allow precise locking with high torque.

Installation and Common Issues

The grip head accepts 5/8, 1/2, 3/8 and 1/4 inch studs or tubing using its four V-shaped toothed jaws. Mount the accessory between the aluminum discs and tighten the big handle until the friction disc locks it securely. The most common issue is insufficient tightening, which lets the load sag or rotate under its own weight.

Compatibility Check Before Ordering

Verify that your light stand, C-stand or mounting point has a 5/8 inch (16mm) receiver to accept the grip head. Confirm the accessory you intend to mount uses one of the four stud sizes listed above. Ensure the combined weight of the arm and mounted gear does not exceed the capacity of your support stand.

How it compares

Measured against everything we stock in Photo Lighting & Studio Flashes, at today’s prices. Recalculated every night.

Price $40.99
Cheaper than about 66% of the 3,696 comparable items (median $57.99).

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the grip arm holds securely once mounted?

Check that the V-jaws clamp firmly on the 16 mm stud, the T-handle locks without slipping, and the machined tube texture prevents rotation under load.

Which components ship with the G203412 and what must I source separately?

The package contains the 40" steel tube, integrated 2-1/2" grip head with 16 mm receiver, big T-handle and roller bearings; lights, flags or stands are not included.

Should I choose the 40" silver version or a different length for overhead rigging?

Select the 40" silver model when you need maximum reach and a non-slip textured tube; shorter arms reduce leverage but increase rigidity.

More in Photo Lighting & Studio Flashes

Similar items