We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red handheld vibration meter with digital display and sensor probe

LANDTEK

LANDTEK VM6380-2 Vibration Meter 10Hz~10kHz electrician tool

SKU CH-VZKR-Q43TN MPN VM6380-2

Measures machinery vibration across a wide 10Hz to 10kHz range and displays velocity, acceleration and displacement simultaneously for predictive maintenance

  • Labor warranty1 Year
  • Product typeTest Equipment
  • Color and finishRed
  • Number of items1 pack
  • Sold asBox
  • Parts warranty3 Years
  • Wide 10 Hz–10 kHz range captures full vibration spectrum
  • Triple-parameter display shows velocity, acceleration, displacement together
  • ISO 2954 compliance ensures reliable machinery fault detection
  • USB/RS-232 and Bluetooth outputs enable PC data logging
  • Bearing-condition monitoring supports predictive maintenance programs

Vibration Meter for Rotating Machinery

The LANDTEK VM6380-2 is a handheld vibration meter built for electricians and maintenance technicians who need to assess the condition of rotating equipment. It measures velocity, acceleration and displacement simultaneously to reveal imbalance, misalignment and bearing faults. The instrument follows ISO 2954 for periodic machine monitoring.

10 Hz to 10 kHz Frequency Range

Acceleration measurements cover a 10 Hz to 10 kHz bandwidth, which captures the dominant vibration signatures of most industrial rotating machines. The fixed range means very low-speed shafts below 10 Hz or high-frequency bearing resonances above 10 kHz fall outside the measurement window. Data can be streamed to a PC through USB or RS-232, with Bluetooth offered as an alternative.

Three-Parameter Display and Bearing Monitoring

One screen shows three parameters at once, letting the operator compare two measurement points or track a single location in depth. The bearing condition function adds a focused diagnostic layer for predictive maintenance programmes. Users who require spectral analysis, route-based data logging or measurements beyond the stated frequency band will need a more advanced analyser.

How it compares

Measured against everything we stock in Electrical Trade Tools & Kits, at today’s prices. Recalculated every night.

Price $379.99
Pricier than about 90% of the 5,006 comparable items (median $95.99).

Specifications

Product
Brand nameLANDTEK
Model nameVM6380-2
Product typeTest Equipment
Color and finishRed
In the box
Number of items1 pack

Questions about this item

What does the 10 Hz to 10 kHz range mean for on-site checks?

It covers the acceleration mode bandwidth used for ISO 2954 periodic measurements on rotating machinery.

How do the USB and RS-232 outputs differ in practice?

Both send data to a PC; USB is standard on modern systems while RS-232 suits legacy industrial setups.

Which ISO standard applies to the bearing-condition function?

The meter follows ISO 2954 for periodic vibration checks that reveal imbalance and misalignment.

More in Electrical Trade Tools & Kits

Similar items