We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pack of ten brass push-fit connectors silver finish

Legris

Legris 3014 53 14 Push-Fit Trap PK10

SKU CH-ZHSS-AFC1R MPN 3014

Pack of ten push-fit brass adapters connect 1/8 in tube to 1/4 in FNPT, rated 290 psi at 175 °F

  • Product typeDrain Components
  • Main materialHAWA
  • Product colorBlack
  • Push-fit design enables tool-free installation
  • Brass construction rated to 290 psi maximum pressure
  • Operates up to 175 °F for demanding vacuum lines
  • 1/8 in tube to 1/4 in FNPT straight adapter
  • Pack of 10 fittings for multiple connection points

Brass push-fit adapter

This brass push-fit adapter joins 1/8 in tubing to a 1/4 in FNPT thread with a straight female connector. The C36000 brass body handles vacuum service up to 290 psi and 175 Degrees F. The pack contains ten pieces for multiple connection points.

Vacuum-line installers

Suited for technicians who need a quick, tool-free seal on 1/8 in outer-diameter tubing in vacuum circuits. Not suited for installers who require a pre-applied thread sealant, a larger tube size, or a different thread standard.

1/8 in to 1/4 in FNPT sizing

The critical specification is the 1/8 in tube outer diameter paired with a 1/4 in FNPT thread, which dictates whether the fitting matches the existing port and tubing. Verify both dimensions before ordering.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $48.99
Pricier than about 62% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameLegris
Model name3014 53 14
Product typeDrain Components
Product colorBlack
Size & build
Main materialHAWA

Questions about this item

How much heat can the brass push-fit fitting handle during continuous vacuum-line duty?

The fitting is rated for a maximum operating temperature of 175 Degrees F, so it will withstand normal engine-bay heat without degrading.

Which thread and tube sizes must my existing lines have for this connector to seal?

Side B requires a 1/4 in FNPT female thread and Side A accepts a 1/8 in tube outer diameter; both must match for a leak-free push-fit joint.

Will the 290 psi pressure rating hold when I reuse older copper or nylon tubing?

Yes, the C36000 brass body is rated to 290 psi, so it will safely handle typical vacuum and low-pressure lines even with older compatible tubing.

More in Drain Stoppers, Strainers & Traps

Similar items