Legris 3199 06 67 Push-Fit Elbow 6 mm × 12 mm PK10
A push-fit elbow connects 6 mm tubing to a 12 mm male thread, rated for 290 psi and 175 °F, supplied in a pack of 10
- Product typeDrain Components
- Main materialHAWA
- Product colorBlack
- Push-fit design speeds installation on 6 mm tubing
- Male 12 mm metric thread connects directly to ports
- Fibre-reinforced nylon withstands 290 psi and 175 °F
- Black finish resists UV and chemical exposure
- Pack of 10 fittings covers multiple connection points
Push-Fit Elbow for Vacuum Lines
This Legris 3199 push-fit elbow connects a 6 mm tube to a 12 mm male metric port. It is built from black fiberglass-reinforced nylon and rated for 290 psi at up to 175 degrees Fahrenheit. The pack contains ten fittings for production or maintenance use. No thread sealant is pre-applied on the male end.
Pneumatic Installers Needing a 90-Degree Transition
Suits technicians routing vacuum lines in tight spaces where a right-angle joint is required. The push-to-connect side accepts 6 mm tubing without tools. Not for installers who need a straight coupling, a different tube diameter, or a female-threaded port. Also unsuitable for systems exceeding the stated pressure or temperature limits.
6 mm Tube to 12 mm Male Metric Connection
The critical specification is the combination of a 6 mm push-fit port and a 12 mm male metric thread in a single elbow body. This exact pairing determines whether the fitting matches the port and tubing in your circuit. Verify both dimensions before ordering.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $48.99
- Pricier than about 62% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3199 06 67 |
| Product type | Drain Components |
| Product color | Black |
| Size & build | |
| Main material | HAWA |
Questions about this item
What tube size and thread size does the 6 mm push-fit side and 12 mm male side require?
The push-fit side accepts a 6 mm outer-diameter tube, and the male side has a 12 mm metric thread for the mating port.
How do you install the elbow, and what step is often missed?
Push the 6 mm tube firmly into the fitting until it seats; then thread the 12 mm male end into the port by hand before tightening with a wrench — skipping the hand-start step risks cross-threading.
When should the elbow be replaced, and what wear signs indicate it?
Replace the elbow if the push-fit grip no longer holds the 6 mm tube securely, if the 12 mm threads show damage, or if the black fiberglass-reinforced nylon body develops cracks or deformation after exposure near the 175 °F / 290 psi limits.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris
Legris 3107 08 00 Push-Fit Cross Fitting 5/16 in Brass/Nylon PK10
- Drain Components
- HAWA
$48.99
0.00059894BTC
In stock
Legris
Legris 3199 06 10 Male Elbow 6mm OD 290 PSI Trap
- Drain Components
- Plastic/Metal Combi…
$48.99
0.00059894BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00017104BTC
In stock