Legris 3199 08 13 Male Elbow 8mm OD 290 PSI PK10
Pack of ten push-fit male elbows connect 8 mm tube to 1/4 inch BSPP thread at 290 psi
- Product typeDrain Components
- Main materialHAWA
- Product colorBlack
- Push-to-connect elbow installs in seconds with no tools
- 8 mm tube OD fits standard pneumatic lines
- ¼ in MBSPP thread connects directly to female ports
- 290 psi rating handles high-pressure air and vacuum
- Fibre-reinforced nylon body resists heat to 175 °F
8 mm Push-Fit Elbow for Vacuum Lines
This black fiberglass-reinforced nylon elbow connects 8 mm outer-diameter tubing to a 1/4 inch MBSPP port using push-to-connect on the tube side. The pack contains ten fittings ready for vacuum applications. No thread sealant is pre-applied on the MBSPP end.
Sustained Pressure and Temperature Limits
The fitting is rated for a maximum operating pressure of 290 psi and a maximum operating temperature of 175 degrees Fahrenheit. These limits apply to continuous service rather than brief spikes, so system pressure and fluid temperature must stay within both values at all times.
Push-to-Connect and MBSPP Interface Constraints
The push-to-connect side seals on the 8 mm tube OD without tools, while the MBSPP side requires a compatible 1/4 inch parallel port and separate thread sealant. Builders needing a different tube size, thread form or built-in sealant must select another fitting.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $64.99
- Pricier than about 69% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3199 08 13 |
| Product type | Drain Components |
| Product color | Black |
| Size & build | |
| Main material | HAWA |
Questions about this item
Will the 290 psi rating hold up during continuous use without leaking?
The fitting is rated for a maximum operating pressure of 290 psi, so it will maintain its seal under normal continuous operation within that limit.
Do I need 8 mm outer-diameter tubing and a 1/4 in MBSPP port ready before installing this elbow?
Yes, side A accepts 8 mm push-to-connect tubing and side B threads into a 1/4 in MBSPP port, so both must be available.
Can I use this black fiberglass-reinforced nylon elbow with older metal piping that runs at 175 °F?
The material withstands up to 175 °F, so it will handle that temperature alongside existing metal pipework.
More in Drain Stoppers, Strainers & Traps
Similar items
HAYWARD POOL PRODUCTS INC BFAS1020CFS 2" Bulkhead Fitting trap
- Drain Components
- HAWA
Legris 3103 60 14 Male Run Tee 3/8 290 PSI PK10 trap
- Drain Components
- HAWA
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Viega 79470 ProPress adapter 1-1/2" × 1-1/2" trap
- Drain Components
- Bronze





