Legris 3675 60 18 Nickel Plated Brass Trap 3/8 in
Nickel-plated brass male connector fits 3/8 in tube to 3/8 in MNPT, rated 435 psi from -4 to 302 °F with FKM gasket and 18 mm hex
- Product typeDrain Components
- Main materialNickel Plated Brass
- Nickel-plated brass resists corrosion for long service life
- 435 psi maximum pressure handles demanding fluid systems
- FKM gasket seals reliably from -4 °F to 302 °F
- 18 mm hex allows secure installation with standard tools
- 3/8 inch tube and MNPT connection fits common plumbing lines
Fitting Details
The Legris 3675 60 18 is a nickel-plated brass male connector designed to join 3/8 in tubing to a matching NPT thread. It withstands up to 435 psi and operates from -4 to 302 degrees F. An FKM gasket seals the joint and an 18 mm hex allows standard tool engagement.
Typical Use Cases
Suits fluid-handling builds that require a corrosion-resistant, high-temperature metal fitting with a straight tube-to-pipe transition. Not intended for installations that demand an elbow, tee or bulkhead configuration, nor for systems exceeding the stated pressure or temperature limits.
Deciding Specification
The 3/8 in tube and pipe size combined with the 435 psi pressure rating determines whether this connector matches the line dimensions and safety margin required by the circuit.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 82% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3675 60 18 |
| Product type | Drain Components |
| Size & build | |
| Main material | Nickel Plated Brass |
Questions about this item
What size hex is needed to tighten the 18 mm fitting on the Legris 3675 60 18?
The fitting has an 18 mm hex, so use an 18 mm spanner or adjustable wrench to secure it without rounding the corners.
Which thread sealant works with the FKM gasket on this 3/8 in male connector?
Apply PTFE tape or a non-hardening pipe thread compound to the 3/8 in MNPT threads; the FKM gasket handles the tube seal so the threads only need lubrication and leak prevention.
How often should the FKM gasket be inspected or replaced on this nickel-plated brass trap?
Inspect the FKM gasket annually or whenever the system is opened; replace it if you see cracks, hardening or permanent compression set from the 302 °F upper temperature limit.
More in Drain Stoppers, Strainers & Traps
Similar items
Nibco, Inc.
Nibco, Inc. 7073LF-34 90° Elbow Trap 3/4 in C x FNPT Bronze
- Drain Components
- HAWA
$10.99
0.00013353BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00016998BTC
In stock