We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass push-fit elbow fitting 1/4 inch tube silver finish

Legris

Legris 3699 06 10 push-fit elbow fitting 1/4 in tube brass silver

SKU CH-CW9P-TM5T5

A brass push-fit elbow connects 6 mm tube to 1/8 in MBSPP, rated 435 psi at 302 °F

  • Push-fit elbow enables quick 1/4 in tube connections
  • Brass construction withstands 435 psi operating pressure
  • Rated for 302 °F maximum operating temperature
  • Compact 19 mm overall length fits tight spaces
  • Pre-applied thread sealant not included for flexible sealing

Legris 3699 06 10 elbow fitting

This Legris push-fit elbow connects a 6 mm tube to a 1/8 in MBSPP thread. The brass body is rated for 435 psi and 302 Degrees F. It suits lubrication lines and other fluid circuits where a compact right-angle joint is required.

Pressure and temperature limits

The fitting withstands a maximum operating pressure of 435 psi and a maximum temperature of 302 Degrees F. Exceeding either limit can cause leakage or fitting failure. The push-to-connect seal relies on the tube tolerances and the thread engagement staying within these boundaries.

Installation notes

Push the 6 mm tube into the push-to-connect side until it seats fully; no tools are needed for that end. The 1/8 in MBSPP thread must be tightened with a spanner, and the joint should be checked for weeps before the system is pressurised. Misaligned tube cuts or damaged threads are the most common causes of leaks.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 68% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameLEGRIS

Questions about this item

Which tube size matches the 6 mm outer diameter on this fitting?

The push-to-connect side accepts 6 mm tube; the other end is a 1/8 in MBSPP thread, so choose this version when your line uses 6 mm tubing.

What does the 435 psi rating mean once the fitting is installed?

It is the maximum operating pressure the brass body and seal can handle at up to 302 °F; do not exceed it in the lubrication circuit.

How does the MBSPP thread on side B limit what I can connect?

Side B is a 1/8 in MBSPP parallel thread; it seals with a bonded washer or O-ring, not by thread taper, so the mating port must be a matching female parallel seat.

More in Hose Fittings, Adapters & Clamps

Similar items