Legris 3699 10 13 90° Male Elbow 10 mm Tube 1/4 in Thread
Nickel-plated brass 90° male elbow connects 10 mm push-fit tube to 1/4 in BSPP thread, rated 435 psi at 302 °F
- Product typeDrain Components
- Push-to-connect design speeds installation on 10 mm tubing
- Male BSPP 1/4 in thread secures directly into ports
- Nickel-plated brass body resists corrosion in fluid systems
- Rated to 435 psi and 302 °F for demanding lines
- Compact 27 mm length fits tight routing spaces
90° Push-Fit Brass Elbow
This nickel-plated brass elbow joins a 10 mm push-to-connect tube to a 1/4 in MBSPP male thread. The 90-degree bend redirects flow in tight plumbing layouts. Rated for 435 psi at up to 302 °F. Overall length is 27 mm.
Suits metric tube to BSPP ports.
Installers connecting 10 mm OD tubing to a 1/4 in parallel male thread will find this a direct fit. It does not accept imperial-sized tube or female-threaded ports. Systems requiring a straight connector or a different thread standard need another fitting.
10 mm push-to-connect to 1/4 in MBSPP
The defining specification is the combination of a 10 mm push-to-connect end and a 1/4 in MBSPP male thread. Verify both the tube outer diameter and the port thread before ordering.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 82% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3699 10 13 |
| Product type | Drain Components |
Questions about this item
What tube outer diameter and thread size does the 90-degree elbow accept?
The fitting takes a 10 mm tube on the push-to-connect side and a 1/4 in MBSPP thread on the male side.
How do you install the push-to-connect end, and what is the common mistake?
Push the 10 mm tube straight in until it seats; the frequent error is not inserting it fully, which leaves the grip ring unengaged.
What ongoing checks does the brass elbow need after installation?
Inspect the joint periodically for leaks and retighten the 1/4 in thread if vibration loosens it; the brass body and seals require no lubrication.
More in Drain Stoppers, Strainers & Traps
Similar items
Nibco, Inc.
Nibco, Inc. 7073LF-34 90° Elbow Trap 3/4 in C x FNPT Bronze
- Drain Components
- HAWA
$10.99
0.00013432BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00017099BTC
In stock