We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact silver box with vented top and bottom, front knob and rear speaker terminals

lelisten

lelisten V3 300W x2 Class D Amplifier Pro Sound

SKU CH-5YCY-GEYTH

A compact Class D stereo amplifier delivering 300 W per channel via a TPA3255 chip with swappable op-amps, 88 dB SINAD and a 48 V supply

  • Product typeAmplifiers
  • 300 watts per channel drives passive bookshelf and tower speakers
  • TPA3255 Class D chip delivers 88 dB SINAD and 110 dB SNR for clean audio
  • Top and bottom vents with full-body heatsink keep components cool under load
  • Swappable NE5532 op-amps let you tailor the sound signature
  • 48 V power supply included for desktop and home-theater setups

Compact 300W x2 Class D Amplifier

The lelisten V3 is a stereo Class D power amplifier rated at 300 watts per channel into a 48 V supply. It uses the TPA3255 chip with Japanese NCC, ELNA and German WIMA capacitors plus Sumida inductors. Measured SINAD reaches 88 dB, signal-to-noise ratio 110 dB and noise floor 140 uV. The compact chassis suits desktop, bookshelf or home-theater installations.

Buyers Who Need Op-Amp Rolling vs Fixed-Gain Users

Socketed NE5532 op-amps let enthusiasts swap to compatible 8-pin dual types for tonal tuning. Builders who prefer a fixed-gain design with no user-serviceable parts should consider other models. The amplifier drives passive bookshelf or tower speakers from 2 to 8 ohms without additional cooling hardware.

48 V Power Supply Requirement

Operation requires the included 48 V external power supply; no other voltage is supported. The whole-body heatsink with top and bottom vents handles thermal loads at the rated 600 W total output. Confirm that your passive speakers match the 2-8 ohm load range before connecting.

How it compares

Measured against everything we stock in Pro Audio Equipment, at today’s prices. Recalculated every night.

Price $165.99
Pricier than about 74% of the 613 comparable items (median $56.99).

Specifications

Product
Product typeAmplifiers

Questions about this item

What speaker impedance range does the TPA3255 Class D amplifier support at 300W per channel?

The V3 drives speakers from 2 to 8 ohms per channel, delivering up to 300W into each load with the included 48V power supply.

What physical clearance does the whole-body heatsink design require for proper cooling?

Leave at least a few centimetres of open space above the top vents and below the bottom vents so air can move through the chassis without obstruction.

How are the stock NE5532 op-amps swapped, and which step is most often missed?

Power off, unplug the 48V supply, gently lift each 8-pin DIP chip with a small tool, align the notch on the replacement op-amp, press firmly until seated, then restore power — skipping the power-off step risks damaging the new op-amps.

More in Pro Audio Equipment

Similar items