We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular wall switch with four preset timer buttons and green LED indicators

Leviton DT130-1LW Countdown Timer Switch 5-10-15-30 min White

SKU CH-ZDXB-3SVVM

A countdown timer switch with four preset buttons up to 30 minutes, no neutral required, rated for 15 A and ½ HP fan loads

  • Item name5-10-15-30 min, No Neutral Required Leviton
  • Rated voltage120 V
  • Power consumption15 A, 120 V
  • Item description5-10-15-30 min, No Neutral Required, Leviton, DT130-1LW, tou
  • Product weight0.24 lb (0.11 kg)
  • Surface finishPlastic
  • Automate fans and lights with four preset countdown buttons
  • No neutral required — green flex sleeve connects to ground wire
  • Shallow 1.3 in depth fits standard wallboxes easily
  • Interchangeable black wires prevent line-load miswiring during DIY install
  • Handles 600W LED, 1800W incandescent and ½ HP motor loads

Bathroom Fan Timer Switch

The Leviton DT130-1LW replaces a standard wall switch with a countdown timer designed for bathroom exhaust fans, heat lamps and towel warmers. Four preset buttons activate the load for 5, 10, 15 or 30 minutes and the switch turns it off automatically when the time expires. A green LED indicates the active timer. It is rated for 120 volts and 15 amps resistive load.

Wiring Flexibility For Retrofit Boxes

The switch fits a standard wallbox with a shallow 1.3 inch depth and requires a ground wire for installation. Its green flex sleeve connects to ground when no neutral is present, or the sleeve can be removed to connect to a neutral wire if one exists in the box. Two interchangeable black wires simplify line and load connections to help prevent miswiring during a DIY install.

Load Capacity And Faceplate Options

The device controls up to 600 watts of LED or CFL lighting, 1800 watts of incandescent or halogen loads, 1200 VA of magnetic or electronic low voltage and fluorescent ballasts, and 1/2 HP or 9.8 amp fan and motor loads. It does not support loads exceeding these ratings or installations without a ground conductor. White faceplate is included; colour change kits are sold separately in ivory, light almond, gray, black and brown.

How it compares

Measured against everything we stock in Fan Speed Controllers & Timers, at today’s prices. Recalculated every night.

Price $47.99
Pricier than about 90% of the 42 comparable items (median $19.99).

Specifications

Product
Brand nameLeviton
Model nameDT130-1LW
Item name5-10-15-30 min, No Neutral Required Leviton
Power
Rated voltage120 V
Power consumption15 A, 120 V
Size & build
Product weight0.24 lb (0.11 kg)
Surface finishPlastic
Main materialPlastic
Product dimensions2.4 in × 3.96 in × 1.3 in

Questions about this item

Does the 15 A rating hold up when the timer runs a 9.8 A fan continuously for 30 minutes?

The switch is rated for 15 A resistive and ½ HP at 9.8 A, so a 30-minute fan cycle stays within its continuous-duty limits.

How warm does the switch get and does it make any noise when the bathroom fan runs all day?

The mechanical relay clicks once on and once off; the plastic body stays near room temperature during normal fan or lighting loads.

My wall box has only line, load and ground — no neutral — will the timer still work?

Yes, the green flex sleeve connects to ground when a neutral is absent, and a ground wire is required for installation.

More in Fan Speed Controllers & Timers

Similar items