NVIDIA Jetson AGX Orin 64GB Development Board 945137300050000
- 12-core Arm Cortex-…
- 64 GB 256-bit LPDDR…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1.51 inch transparent OLED module with a 128×64 light blue display, embedded driver chip, and SPI or I2C interfaces for Raspberry Pi, Arduino, and STM32
The LORDWORLD module is a 1.51inch transparent OLED display with a 128×64 resolution and light blue emission. It targets hobbyists and engineers building Raspberry Pi, Arduino or STM32 projects that need a see-through readout. The board ships new and includes an embedded driver chip to simplify integration.
The single specification that decides fit is the combined 4-wire SPI and I2C interface on one module. This dual option lets the display talk to almost any microcontroller without extra level-shifting hardware. If your host board lacks either bus, this part will not connect.
Because the driver chip lives on the module, the host controller only needs the serial bus lines and power. No parallel data lines or timing-critical bit-banging are required, leaving more GPIO free for sensors or actuators. Development examples for the three supported platforms are available from the supplier.
Measured against everything we stock in Single-Board Computers & Dev Kits, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | LORDWORLD |
The 1.51 inch transparent OLED shows light blue graphics at 128×64 pixels, giving a crisp readout for status icons or sensor values in a compact see-through area.
The module supports both 4-wire SPI and I2C, so you can choose the faster SPI path or the simpler two-wire I2C bus depending on your host board.
The display ships as a bare module with a pin header for SPI/I2C; it has no mounting holes, so you secure it with a custom bracket or hot-melt adhesive in your enclosure.
More in Single-Board Computers & Dev Kits
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?