LORDWORLD JCA140 USB-C to DisplayPort Adapter 4K 60Hz 14.5 cm
Connects a USB-C device to a DisplayPort display at 4K 60Hz with a 14.5 cm aluminum cable
- Connect a 4K display at 60 Hz via DisplayPort 1.2
- Plug-and-play operation with no driver installation needed
- USB-C Alternate Mode carries video directly from the port
- Compact 14.5 cm cable keeps the setup tidy
- Aluminium housing protects the connector and aids heat dissipation
Connect 4K displays via USB-C
The JCA140 adapter links a USB-C laptop or tablet to a DisplayPort monitor, projector or HDTV at 4K 60Hz. It complies with DisplayPort 1.2 and uses Alternate Mode so no driver installation is needed. The 14.5 cm cable suits desk setups where a short reach keeps the workspace tidy. Plug it in and the external screen is ready immediately.
Passive aluminium build runs silent
The adapter draws power from the host port and has no active electronics that generate heat or noise. Its aluminium housing acts as a passive heat spreader, so the unit stays cool during typical office or streaming use. There is no fan, no coil whine and no measurable temperature rise under normal loads. Power consumption stays within the host port’s standard current limit.
Short fixed cable limits placement options
The integrated 5.5 in cable cannot be replaced or extended without adding a separate coupler, so the source device must sit close to the display input. Users needing longer runs or routing through cable trays will need a different solution. The aluminium shell resists wear from frequent connect and disconnect cycles. No bundled software or accessories alter this physical constraint.
How it compares
Measured against everything we stock in USB Graphics & Display Adapters, at today’s prices. Recalculated every night.
- Price $33.99
- Pricier than about 67% of the 749 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | LORDWORLD |
Questions about this item
How do I install the JCA140 adapter and which step do people often miss?
Plug the USB-C male end into a host port that supports DisplayPort Alternate Mode, then connect a DisplayPort cable to the female port; the step often missed is confirming the host port carries video, as data-only USB-C ports will not work.
What maintenance or replacement will the JCA140 need over time?
The adapter has no moving parts or firmware; only the 14.5 cm cable and aluminum housing may need replacement if the connectors wear or the cable is damaged from repeated bending.
What limit appears first during sustained 4K 60Hz use?
The 14.5 cm cable length limits placement flexibility, and the DisplayPort 1.2 bandwidth ceiling caps resolution at 4K 60Hz without support for higher refresh rates or HDR metadata.
More in USB Graphics & Display Adapters
Similar items
Rocstor Y10A177-B1 USB Display Adapter USB 3.0 to HDMI 1920x1200
Nippon Labs 30C-10UC-CHM4K60-03 USB-C to HDMI Adapter Cable 3 ft 4K@60Hz
- USB 3.1 Type C Male…
- 3 ft (0.91 m)
STARTECH CDP2HD4K60H USB-C to HDMI Adapter 4K 60Hz HDR usb display adapter
- USB-C to HDMI
- 4.1 in (10.4 cm)
STARTECH USB32HD2 USB 3.0 dual HDMI display adapter 4K 30 Hz 64 MB
- USB to HDMI Adapters
- Black
Plugable Technologies USB-VGA-165 usb display adapter 1920x1080 USB 2.0
- USB to VGA





