LPScreen B133UAN02.3 13.3" WUXGA 1920x1200 60Hz laptop screen
13.3" WUXGA 1920x1200 60Hz replacement panel with 400 cd/m² brightness, 100% sRGB colour and 85° viewing angles
- Screen size13.3 in (33.8 cm)
- Supported modelsB133UAN02.3
- Display resolutionWUXGA 1920 × 1200
- Sharp WUXGA 1920x1200 detail on a 13.3 inch panel
- 400 cd/m² brightness keeps content clear in bright rooms
- 100% sRGB with 16.7M colours for accurate colour work
- Wide 85° viewing angles stay consistent from every side
- Brand new non-touch replacement matched to B133UAN02.3
Exact replacement panel
The LPScreen B133UAN02.3 is a 13.3 inch WUXGA display built to replace a panel with the identical part number. It delivers a 1920x1200 resolution at 60Hz for users who need a direct swap without adapter boards or firmware changes.
Thermals and power
As a passive LCD module the screen generates no audible noise and draws only the power required by its backlight at 400 cd/m² brightness. Normal use adds negligible heat to the laptop chassis and places no extra demand on the system fan curve.
Bundled value
The package contains the panel only; no bezel, hinges, cables or calibration software are included. Installers must reuse the original mounting hardware and video cable, so buyers who need a complete lid assembly or touch-digitiser integration should source those parts separately.
How it compares
Measured against everything we stock in Laptop Screens & Display Panels, at today’s prices. Recalculated every night.
- Price $74.99
- Cheaper than about 57% of the 4,554 comparable items (median $78.99).
- Screen size 13.3 in (33.8 cm)
- Lower than about 80% of the 2,802 comparable items (median 14 in).
Specifications
| Product | |
|---|---|
| Model name | B133UAN02.3 |
| Part number | B133UAN02.3 |
| Display | |
| Screen size | 13.3 in (33.8 cm) |
| Display resolution | WUXGA 1920 × 1200 |
| Compatibility | |
| Supported models | B133UAN02.3 |
Questions about this item
How do I install the B133UAN02.3 13.3" panel and which step causes the most issues?
Disconnect the battery, remove the bezel, unscrew the old panel, unplug the eDP cable, connect the new cable firmly, reseat screws, then test before snapping the bezel back. The step most people miss is fully seating the 30-pin connector on both ends.
What maintenance or replacement will the B133UAN02.3 need over time?
No scheduled maintenance is required. If brightness drops below the 400 cd/m² spec or dead pixels appear, the whole panel is replaced as a unit; the backlight is not serviceable separately.
What limit appears first during sustained use of the B133UAN02.3?
The 60 Hz refresh rate caps motion clarity, so fast scrolling or gaming will show blur before the 400 cd/m² brightness or 100 % sRGB colour accuracy becomes a constraint.
More in Laptop Screens & Display Panels
Similar items
LPScreen B140UAN02.2 HW1A 14" WUXGA 1920x1200 60Hz laptop screen
- 14 in (35.6 cm)
- B140UAN02.2HW1A
NUOLAISUN 13.6" Full Top Assembly Display MacBook Air A3240 M4 2025 Silver
LPScreen B156HAN15.0 15.6" 1920x1080 144Hz laptop screen
- 15.6 in (39.6 cm)
- B156HAN15.0HW0A
NUOLAISUN 17.3" FHD 1920x1080 30 Pin Non-Touch Laptop Screen for Dell Inspiron 17 3781 3782 3785 3790 3793
LPScreen B160UAK01.0 16 inch WUXGA 1920x1200 60Hz Touch laptop screen
- 16 in (40.6 cm)
- B160UAK01.0





