We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular VGA switcher with front push buttons and rear ports

LUOM

LUOM 4x3 VGA Switcher Splitter 4 In 3 Out 1920x1080 Black

SKU CH-NP3E-FZTME

Routes four VGA sources to three displays at up to 1920x1080 with push-button or IR remote switching

  • Port count4
  • Maximum supported resolutions1920 × 1080
  • Product colorBlack
  • Connect 4 VGA sources to 3 displays via front-panel button or IR remote
  • Mirror one VGA signal to three monitors at 350 MHz bandwidth
  • Switch four computers to share up to three screens without drivers
  • Supports 1920 x 1080 and 1920 x 1440 resolutions at 200 MHz video bandwidth
  • Compact metal enclosure with anti-skid feet for portable or desktop use

4-in-3-out VGA Switcher Splitter

The LUOM 4x3 VGA Switcher Splitter connects four VGA sources to three VGA displays, duplicating the selected input across all outputs. It accepts resolutions up to 1920x1080 and WUXGA 1920x1440, handling VGA, SVGA, UXGA and multisync signals. A push-button on the unit and an included IR remote let you change the active source without unplugging cables. The box ships with a DC 5 V power adaptor and a user manual.

Suits multi-source presentation setups

This unit suits classrooms, conference rooms, trade-show booths or any installation where several computers must take turns driving the same image on up to three monitors or projectors. It does not extend the desktop across screens, so users who need independent content on each display should look at a matrix switcher or a multi-output graphics solution. The maximum supported resolution is 1920x1080, so anyone requiring 4K or higher pixel counts will need different hardware.

1920x1080 maximum resolution limit

The single specification that decides fit is the 1920x1080 ceiling on the output side; sources set above this resolution will not display correctly. The device mirrors the chosen input to all three outputs simultaneously and cannot route different sources to different screens. If your workflow demands per-display source selection or resolutions beyond 1920x1080, this switcher splitter will not meet the requirement.

How it compares

Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.

Price $23.99
Cheaper than about 60% of the 1,998 comparable items (median $27.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product colorBlack
Display
Maximum supported resolutions1920 × 1080
Ports & slots
Port count4

Questions about this item

What cables and sources do I need to connect to the four VGA inputs?

You need four VGA source devices such as computers or laptops and four VGA cables to plug into the four input ports on the switcher.

Will the three mirrored outputs work with a mix of older 4:3 monitors and newer 16:9 displays at 1920 x 1080?

Yes, the splitter duplicates the same signal to all three outputs and supports 4:3, 16:9 and 16:10 aspect ratios up to 1920 x 1080 resolution.

How can I verify the unit is switching and duplicating correctly after I connect everything?

Press the front panel button or use the IR remote to cycle through the four inputs; each of the three connected displays should instantly show the same picture from the selected source.

More in HDMI & AV Selector Switches

Similar items