LUOM TJ-A033 DisplayPort 1.4 cable 16.4 ft 32.4 Gbps HBR3 8K@60Hz 4K@144Hz 2K@240Hz
- 16.4 ft (5 m)
- DisplayPort Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Transmits 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz over 16.4 ft with 32.4 Gbps bandwidth
Cable Length 16.4 Feet
The LUOM DP28 is a 16.4 ft DisplayPort 1.4 cable rated for 32.4 Gbps HBR3 bandwidth. Male-to-male connectors link a GPU or laptop directly to a monitor, projector or TV. It suits builders who need a long run without signal boosters and gamers targeting high refresh rates at 4K or 2K resolutions.
The 28 AWG tinned-copper conductors carry 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz with DSC 1.2 visually lossless compression and FEC forward error correction. HDCP 2.2 and 1.4 plus HDR10 pass through unchanged. Backward compatibility with DisplayPort 1.3, 1.2 and 1.1 keeps older displays working.
Replaces shorter or lower-bandwidth DisplayPort cables that cap at 4K 60 Hz or 2K 144 Hz. The jump is worth it when the source and sink both support HBR3 and the run exceeds typical passive lengths. Not for buyers who need USB-C Alt Mode, DisplayPort 2.1 UHBR speeds or runs beyond 16.4 ft without an active extender.
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | LUOM |
| Model name | DP28 |
| Product type | DisplayPort |
| Product color | Silver |
| Performance | |
| Rated speed | Supports up to 32.4 Gbit/s bandwidth. |
| Display | |
| Refresh frequency | 8K@60 Hz, 5K@60 Hz, 4K@144 Hz, 4K@60 Hz, 2K@240 Hz, 2K@165 Hz |
| Ports & slots | |
| Connector count | 1 |
| Source connector | 1 x DisplayPort 1.4 |
| Destination connector | 1 x DisplayPort 1.4 |
| Connector details | DisplayPort to DisplayPort( Male to Male) |
| Connector gender | Male to Male |
Other versions of this model
Plug each male DisplayPort connector firmly until the locking tabs click; the step many miss is pressing the release button before pulling the cable out, which prevents port damage.
The 28AWG tinned-copper conductors and nylon braid require no scheduled maintenance; replace the cable only if the connectors loosen, the braid frays, or signal drop-outs appear at 8K@60Hz or 4K@144Hz.
The 32.4Gbps HBR3 bandwidth ceiling is reached first; running 4K@144Hz or 2K@240Hz with 10-bit HDR and DSC 1.2 compression uses the full pipe, so any further resolution or refresh increase will fail.
More in DisplayPort Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?