LUOM Essager XJ USB-C Cable 100W 5A 3.3ft Transparent Shell
- USB Type-C
- USB-C Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 3.3ft USB-A to USB-C cable with an LED display and built-in E-Marker chip, delivering up to 100W at 7A for fast charging and 480Mbps data transfer
The LUOM Essager XR is a USB-A to USB-C charging and data cable rated for up to 100W and 7A current. It includes a built-in E-marker chip and an LED display that shows real-time charging status. The 3.3ft length suits desk or bedside use with laptops, tablets and phones that charge via USB-C.
It replaces older USB-A to USB-C cables limited to lower wattage or without a current display. The jump is worth it when you need 100W power delivery for larger laptops or want visible confirmation that fast-charging protocols such as PD, QC, AFC or FCP are active. The cable also provides USB 2.0 480Mbps two-way data transfer.
Verify that your power adapter and the device both support the same fast-charging protocol to reach the rated output. The connector is USB-A on the host side, so the charger or port must provide a USB-A socket. This cable does not carry video signals, so it cannot drive external displays.
Measured against everything we stock in Charging Stations & Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | LUOM |
| Product line | Essager XR |
| Model name | Essager XR |
| Product type | USB-C Cable |
| Product color | Black |
| Ports & slots | |
| Adapter connector | USB Type-C |
| Full-size USB ports | 1 |
| Power | |
| Output voltage | 11 V |
Other versions of this model
The cable is 3.3 ft long and plugs into a standard USB-A port for charging and data.
Plug the USB-A end into a fast-charging wall charger that supports the required protocol, then connect the USB-C end to your device; the built-in E-marker chip and LED will then display the real-time power level.
If the LED display no longer lights up during charging, the internal E-marker chip may have failed and the cable should be replaced to restore full 100 W monitoring.
More in Charging Stations & Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?