VCE SJ661-100P-CA Cat6 RJ45 Pass Through Connectors 100-Pack
- Ethernet, Male
- Unshielded, Male
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits one Ethernet cable into two simultaneous gigabit connections with USB power
The LUOM OZHW3 turns a single RJ45 cable into two active 1000 Mbps ports so two devices can share one wired connection without running new cabling. It is aimed at home or small-office users who need an extra Ethernet drop for a PC, TV box or router but cannot pull additional lines through walls.
The adapter draws power from the included 80 cm USB cable and must remain connected to a USB power source to function. With no moving parts it produces no audible noise and adds negligible load to the power supply, making it suitable for silent environments.
The bundle supplies the splitter and a 2.6 ft USB power cord only; no drivers or configuration utilities are required. Compatibility spans Cat5 through Cat8 cables and common networking gear such as ADSL modems, switches, routers and set-top boxes, letting you add a second wired device immediately.
Measured against everything we stock in Network Adapters & RJ45 Plugs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | LUOM |
| Model name | OZHW3 |
| Product type | Ethernet Splitter 1 to 2 RJ45 Network Adapter |
| Adapter type | Gigabit RJ45 Ethernet Splitter 1 to 2 |
| Ports & slots | |
| Connector type | RJ45 |
| Size & build | |
| Product dimensions | 4.02 × 3.74 × 1.06 in |
| Product weight | 3.2 oz |
| In the box | |
| In the box | RJ45 Ethernet Splitter X1 USB Power Cord X1 |
Plug the included 80 cm USB cord into any 5 V USB port or wall adapter, then connect one Ethernet cable from the router to the single RJ45 input and two cables from the dual female ports to your devices; the unit will not function without this power connection.
No scheduled maintenance is needed; simply keep the RJ45 contacts clean and ensure the USB power source remains connected, replacing the cable only if it becomes damaged.
The splitter shares a single 1000 Mbps uplink, so combined traffic from the two female ports cannot exceed that gigabit rate, creating the first bottleneck under sustained heavy use.
More in Network Adapters & RJ45 Plugs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?