We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black braided DisplayPort 1.4 cable with gold male connectors, 10 ft

LUOM

LUOM TJ-A033 DisplayPort 1.4 Cable 10 ft 32.4 Gbps 8K@60Hz

SKU CH-RE1A-688JX

A 10 ft DisplayPort 1.4 cable rated for 32.4 Gbps bandwidth, supporting 8K at 60 Hz and 4K at 144 Hz with HDR and DSC

  • Refresh frequency8K (7680 × 4320) @ 60 Hz / 30 Hz, 5K (5120 × 2880) @ 60 Hz /
  • Rated speedTest Value
  • Cable length10 ft (3.05 m)
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4

Cable Length 10 Feet

  • 8K 60 Hz clarity backed by 32.4 Gbps HBR3 bandwidth
  • 4K 144 Hz gaming fluidity via DSC 1.2 compression
  • 2K 240 Hz competitive edge with FEC error correction
  • Triple-shielded solid copper keeps signals clean over 10 ft
  • 24-carat gold connectors resist corrosion for lasting contact

LUOM TJ-A033 DisplayPort 1.4 Cable 10 ft

This DisplayPort 1.4 cable carries HBR3-rated bandwidth up to 32.4 Gbit/s. Male-to-male connectors link a GPU or laptop to a monitor at lengths of 10 ft. Triple-shielded construction and solid copper conductors preserve signal integrity. It supports DSC 1.2, FEC and HDCP 2.2 for protected 8K content.

Suits 8K 60 Hz or 4K 144 Hz setups.

Builders running 8K at 60 Hz, 4K at 144 Hz or 2K at 240 Hz gain full HBR3 headroom. HDR, MST and 32-channel audio pass through without compression artefacts. Buyers needing cable runs beyond 10 ft or legacy DisplayPort 1.2-only ports should consider other options.

HBR3 32.4 Gbit/s bandwidth decides compatibility

The single spec that determines fit is the HBR3-rated 32.4 Gbit/s bandwidth. It unlocks 8K 7680×4320 at 60 Hz, 4K 4096×2160 at 144 Hz and 2K 2560×1440 at 240 Hz with DSC 1.2. Without HBR3 support on both source and sink, these modes will not activate.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $13.99
Cheaper than about 65% of the 3,804 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameLUOM
Model nameTJ-A033
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speedTest Value
Display
Refresh frequency8K (7680 × 4320) @ 60 Hz / 30 Hz,
5K (5120 × 2880) @ 60 Hz / 30 Hz,
4K (4096 × 2160) @ 144 Hz / 120 Hz/60 Hz/30 Hz,
2K (2560 × 1440) @ 240 Hz / 165 Hz/144 Hz/120 Hz/60 Hz/30 Hz,
1080p (1920 × 1080) @ 240 Hz / 165 Hz/144 Hz/120 Hz/60 Hz/30 Hz,
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort 1.4 Cable 8K@60 Hz
Connector genderMale to Male
Size & build
Overall length10 ft (3.05 m)
Cable length10 ft (3.05 m)
Cable shieldingTriple-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123
Compatibility
Supported platformsWorks with Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

How do I plug the 10 ft DisplayPort 1.4 cable into my graphics card and monitor, and what step do people often miss?

Insert each male connector fully until the latch clicks; the common mistake is stopping before the latch engages, which can cause a loose link and signal dropouts.

What maintenance or replacement will the braided DisplayPort 1.4 cable need over time?

The nylon braid and gold-plated contacts are passive; no scheduled maintenance is required, but replace the cable if the braid frays, a connector bends, or 8K@60Hz stability degrades.

What is the first limit that appears when running 8K@60Hz continuously on this 32.4 Gbps cable?

The 32.4 Gbps HBR3 bandwidth ceiling is reached first; sustained 8K@60Hz uses the full pipe, so any extra overhead such as deep colour or high refresh rates will hit that limit.

More in DisplayPort Monitor Cables

Similar items