We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

LUOM

LUOM TJ-A114 DisplayPort 2.0 cable 6.6 ft 80 Gbps 16K 60 Hz

SKU CH-PVW5-D5VXR

A 6.6 ft DisplayPort 2.0 cable carrying 80 Gbps for 16K at 60 Hz, 8K at 60 Hz and 4K at 165 Hz with DSC and HDR

  • Refresh frequency16K@60 Hz(With DSC)/10K@60 Hz/8K@60 Hz/4K@165 Hz/4K@144 Hz(N
  • Cable length6.6 ft (2.01 m)
  • Connector count1
  • Source connector1 x DisplayPort 2.0
  • Destination connector1 x DisplayPort 2.0
  • Connector detailsDisplayPort to DisplayPort 2.0 Cable 16K@60 Hz
  • Delivers 16K resolution at 60 Hz using DSC compression
  • Provides 80 Gbps bandwidth for stable high-speed transmission
  • Supports 4K at 165 Hz with no compression required
  • Backward compatible with DisplayPort 1.4 and 1.2 devices
  • Features gold-plated connectors and braided construction for durability

LUOM TJ-A114 DisplayPort 2.0 cable

This LUOM TJ-A114 cable carries DisplayPort 2.0 signals between a source and a display. It supports up to 80 Gbps bandwidth and handles resolutions up to 16K at 60 Hz with DSC, 10K at 60 Hz, 8K at 60 Hz, and 4K at 165 Hz or 144 Hz without compression. The 6.6 ft braided copper construction uses gold-plated male connectors on both ends.

Fits a single DisplayPort 2.0 link in your build

Connect a PC, laptop, or other DisplayPort 2.0 source directly to a compatible monitor, TV, or projector. The cable is backward compatible with DP 1.4 and DP 1.2 equipment, so it works with existing hardware while leaving headroom for future 10K and 16K panels. Dynamic HDR, HDCP, CEC, EDID, eARC, DSC 1.2a, and Forward Error Correction are supported over the single link.

Suits builders driving 4K high-refresh

Gamers and creators who need 4K at 165 Hz or 144 Hz without compression, or who plan to adopt 8K, 10K, or 16K monitors, will use the full 80 Gbps capability. Users only requiring 4K at 60 Hz or lower resolutions on older DP 1.2 or 1.4 ports will not need this bandwidth headroom.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $12.99
Cheaper than about 70% of the 3,804 comparable items (median $15.99).
Refresh frequency 16K@60 Hz(With DSC)/10K@60 Hz/8K@60 Hz/4K@165 Hz/4K@144 Hz(No Compression).
Typical for this category: the median of 648 items is 60 Hz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameLUOM
Model nameTJ-A114
Product typeDisplayPort Cable
Product colorBlack
Display
Refresh frequency16K@60 Hz(With DSC)/10K@60 Hz/8K@60 Hz/4K@165 Hz/4K@144 Hz(No Compression).
Ports & slots
Connector count1
Source connector1 x DisplayPort 2.0
Destination connector1 x DisplayPort 2.0
Connector detailsDisplayPort to DisplayPort 2.0 Cable 16K@60 Hz
Connector genderMale to Male
Size & build
Overall length6.56 ft (2 m)
Cable length6.6 ft (2.01 m)

Other versions of this model

5 more in the same range

Questions about this item

Will the 80 Gbps bandwidth hold up over the full 6.6 ft length at 16K 60 Hz?

The cable is rated for 80 Gbps across its 6.6 ft length and supports 16K at 60 Hz with DSC enabled.

Does the braided copper cable run hot or draw extra power during all-day 4K 165 Hz gaming?

It is a passive copper cable with no active electronics, so it generates no heat and draws no additional power beyond the DisplayPort source.

Must my monitor and graphics card both have DisplayPort 2.0 ports to use this cable?

The cable uses male-to-male DisplayPort 2.0 connectors and is backward compatible with DP 1.4 and DP 1.2 ports on either end.

More in DisplayPort Monitor Cables

Similar items