We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small cylindrical metal end mill with ball nose tip

M.A. Ford

M.A. Ford 156M0060N10A 0.60 mm 2 Flute Ball Nose End Mill

SKU CH-NDP6-74YQA

A 0.60 mm two-flute ball nose end mill with necked design for precision milling

  • Product typeCutting Tools
  • Precision 0.60 mm ball nose for fine contours
  • Two-flute design clears chips efficiently in tight spaces
  • Necked shank improves reach without sacrificing rigidity
  • TuffCut DM coating resists wear on abrasive materials
  • California Prop 65 notice included for compliance awareness

Precision Milling Tool

The M.A. Ford 156M0060N10A is a 0.60 mm diameter, two-flute ball nose end mill with a necked design. It is engineered for precision contouring and finishing operations in detailed machining work. The small cutting diameter suits intricate profiles and tight radii. This tool is intended for machinists and manufacturers requiring fine detail capability.

Upgrade From Larger Cutters

This end mill replaces larger-diameter tools when feature size or corner radius demands a smaller profile. The jump is justified when part geometry cannot be accessed or finished accurately with standard sizes. The necked shank provides additional reach in deep cavities without increasing the cutting diameter. It addresses the need for finer resolution in complex three-dimensional surfaces.

Capacity And Limits

The 0.60 mm cutting diameter comfortably handles micro-scale profiling, engraving, and tight-radius finishing in a range of materials. Headroom is defined by the small flute length and neck relief, which limit axial depth per pass. The tool runs out when material removal rates require heavier chip loads or when workpiece features exceed the cutter’s reach and rigidity envelope.

How it compares

Measured against everything we stock in Yard Ornaments & Garden Statues, at today’s prices. Recalculated every night.

Price $44.99
Pricier than about 54% of the 1,271 comparable items (median $40.99).

Specifications

Product
Brand nameM.A. FORD
Product typeCutting Tools

Questions about this item

What shank diameter does the 0.60 mm end mill need to fit my collet?

The 0.60 mm cutting diameter requires a matching collet or holder sized for that shank; verify your tool holder accepts the shank diameter before mounting.

How do I install the necked ball nose cutter without damaging the flutes?

Insert the tool fully into the collet, tighten evenly to avoid run-out, and ensure the necked section clears the workpiece — over-tightening or short clamping are the common errors.

When should I replace this 2 flute end mill?

Replace the cutter when the ball nose shows visible wear, chipping, or when cut quality drops; the California Proposition 65 notice applies to the tool material during disposal.

More in Yard Ornaments & Garden Statues

Similar items