We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical silver twist drill with coolant hole 6.80mm

M.A. Ford

M.A. Ford 2XDCE2677A Twister XD Drill 12X-25X Coolant Fed 6.80mm

SKU CH-NR50-QHFBD

Coolant-fed Twister XD drill reaches 12 to 25 times diameter at 6.80 mm

  • Drills up to 25× diameter for deep holes
  • 12× minimum depth covers wide range
  • 80 mm size fits precise applications
  • Coolant-fed design improves chip evacuation
  • M.A. Ford brand ensures professional quality

M.A. Ford Twister XD Drill 6.80mm

The M.A. Ford Twister XD drill is a solid-carbide cutting tool designed for high-performance drilling in demanding materials. It features a 6.80mm diameter and integrated coolant channels for effective heat removal and chip evacuation. The tool targets professional machinists and manufacturers who require precise, deep-hole capability in CNC environments.

Suited for deep-hole CNC drilling with coolant feed

This drill suits workshops running CNC machines equipped with through-spindle or external coolant delivery at the pressures needed for 12X to 25X diameter depths. It is not for manual drilling, drill-press work, or machines without adequate coolant flow and pressure. Buyers needing larger diameters, different length ratios, or non-coolant-fed geometries should select alternative tooling.

12X to 25X diameter coolant-fed drilling range

The defining specification is the 12X to 25X diameter drilling depth capability combined with internal coolant feed. This range dictates whether the tool matches the hole-depth requirement and machine coolant capability. Verify that the application falls within this depth band and that the machine can supply sufficient coolant pressure before purchase.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $440.99
Pricier than about 91% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

How do I install the 6.80 mm Twister XD drill in a coolant-fed holder and what step is often missed?

Secure the 6.80 mm shank in a matching hydraulic or shrink-fit holder, connect the coolant supply to the tool's internal port, then verify flow exits the tip before starting the spindle — skipping the flow check is the common error.

What maintenance will the 2XDCE2677A drill need during its service life?

Inspect the coolant hole for chip packing after each job, re-sharpen the point on a CNC grinder when flank wear becomes visible, and replace the drill once the diameter drops below the tolerance required for the hole.

What limit appears first when running this drill continuously at 12X-25X diameter depth?

Chip evacuation through the 6.80 mm coolant-fed flutes typically becomes the limiting factor before tool wear, so monitor for packing and reduce feed if chips stop flowing freely.

More in Power Drills, Drivers & Cutting Bits

Similar items