We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 7.00 mm Twister Xd drill with coolant holes

M.A. Ford

M.A. Ford 2XDCE2756A Twister Xd Drill 12X-25X Coolant Fed 7.00Mm

SKU CH-5ZYM-XNW57

A coolant-fed drill for 12X to 25X applications with a 7.00 mm diameter

  • Drills 12X-25X depth for deep-hole capability
  • Coolant-fed design clears chips for clean cuts
  • 00 mm diameter suits precise metric tasks
  • Twister XD geometry boosts drilling efficiency
  • California Prop 65 warning informs safe handling

7.00 mm Twister XD drill for deep holes

The M.A. Ford 2XDCE2756A Twister XD drill is a coolant-fed carbide tool built for 12x to 25x diameter drilling depths. It targets machine shops and production lines that need accurate deep-hole performance in a 7.00 mm diameter. Buyers who need larger diameters or non-coolant-fed geometries should select a different tool.

Coolant-fed shank requires through-spindle supply

Installation is straightforward on any CNC or machining centre equipped with through-spindle coolant delivery. The shank fits standard tool holders for this diameter. Problems arise when the machine lacks adequate coolant pressure or filtration, which can cause chip packing and premature wear at depth.

12x to 25x diameter drilling depth range

The defining specification is the 12x to 25x diameter drilling depth capability enabled by the internal coolant channel. This range determines whether the drill reaches your required hole depth in a single pass. Verify your application falls within this multiple of the 7.00 mm diameter before ordering.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $478.99
Pricier than about 91% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

How do I verify the 7.00 mm Twister Xd Drill is drilling true after setup?

Run a test hole in the intended material, measure the bore diameter and check for straightness; consistent 7.00 mm results confirm the drill is working as intended.

What comes in the box with the 2XDCE2756A and what must I supply separately?

The box contains the 7.00 mm Twister Xd Drill only; you must provide a compatible coolant-fed holder, coolant supply and a machine spindle that accepts the shank.

Which Twister Xd variant should I choose for a 12× to 25× depth-to-diameter range?

The 2XDCE2756A is built for 12×–25× depth-to-diameter ratios, so select this model when your holes fall in that range.

More in Power Drills, Drivers & Cutting Bits

Similar items