We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver Twister XD drill bit 10.50mm with coolant hole

M.A. Ford

M.A. Ford 2XDCE4134A Twister XD Drill 12X-25X Coolant Fed 10.50mm

SKU CH-2K32-WKZX4

Coolant-fed drill operates at 12 to 25 times diameter with a 10.50 mm cutting diameter

  • Drills 12 to 25 times diameter in one pass
  • Coolant-fed design clears chips from deep holes
  • 50 mm diameter suits precise metric drilling
  • Twister XD geometry reduces thrust and heat
  • M.A. Ford quality built for professional use

M.A. Ford Twister XD 10.50mm Drill

The M.A. Ford Twister XD drill is a 10.50mm coolant-fed tool built for high-performance drilling. It targets machinists and engineers who need reliable hole-making in demanding materials. The design supports deep-hole applications where chip evacuation and cooling are critical. This drill suits production environments that value consistency and tool life.

12X to 25X diameter depth capacity

The drill handles depths from 12 to 25 times its diameter with internal coolant delivery. This range covers deep-hole requirements in tough alloys and steels where external coolant cannot reach. Beyond 25X diameter, chip packing and deflection risk increase without specialised peck cycles or tooling. The coolant-fed design extends practical limits compared to non-coolant drills of the same size.

Coolant-fed interface practical limits

Internal coolant channels require adequate machine pressure and filtration to prevent blockage. Low-pressure systems may starve the cutting zone, reducing tool life in deep holes. The 10.50mm shank fits standard tool holders but demands precise runout control at extended lengths. California Proposition 65 warnings apply to chemicals present in the product.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $619.99
Pricier than about 92% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

Will the 12X-25X coolant-fed design work with my existing drill press spindle?

The 12X-25X coolant-fed drill requires a machine spindle capable of delivering internal coolant at the correct pressure; verify your drill press has through-spindle coolant capability before fitting the 10.50mm shank.

How do I confirm the Twister XD drill is cutting correctly after installation?

Check for consistent chip evacuation through the coolant holes, steady feed force, and a clean 10.50mm hole diameter without oversize or chatter during the first test cuts.

Does the 2XDCE4134A package include coolant fittings or just the drill bit?

Only the 10.50mm Twister XD drill bit is supplied; coolant supply tubes, connectors and any required adapters must be sourced separately to match your machine's coolant system.

More in Power Drills, Drivers & Cutting Bits

Similar items