We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver Twister XD drill bit 12.70mm with coolant holes

M.A. Ford

M.A. Ford 2XDCE5000A Twister Xd Drill 12X-25X Coolant Fed 12.70mm

SKU CH-GM3H-Y62MC

Coolant-fed Twister XD drill operates at 12 to 25 times diameter with 12.70 mm size

  • 12X–25X drilling depth range for deep-hole capability
  • Coolant-fed design improves chip evacuation and tool life
  • 70 mm diameter suits standard tooling setups
  • Twister XD geometry enhances performance in tough materials
  • California Proposition 65 warning informs safe handling practices

12.70 mm Twister XD drill for deep holes

The M.A. Ford 2XDCE5000A is a solid-carbide Twister XD drill designed for 12X to 25X diameter drilling depths. It targets machine shops and production lines that need reliable deep-hole performance in a single pass. The 12.70 mm cutting diameter suits medium-sized hole requirements in ferrous and non-ferrous materials.

Coolant-fed design reduces external plumbing

Internal coolant channels deliver fluid directly to the cutting zone, which improves chip evacuation and tool life at extended depths. This design removes the need for high-pressure external flood systems and frees up spindle clearance for fixture access. Shops gain a cleaner setup without sacrificing cooling efficiency at depth.

Handles 12X to 25X depth range in one tool

The drill comfortably covers the full 12X to 25X diameter depth window, reducing tool changes on deep-hole jobs. Beyond 25X diameter, chip packing and deflection risk increase, so a dedicated gun drill or BTA tool becomes necessary. The 12.70 mm diameter sits at the upper end of the Twister XD standard range.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $524.99
Pricier than about 91% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

What depth-to-diameter ratio does the 12X-25X Twister Xd drill reach before chip evacuation becomes the limiting factor?

The 12X-25X designation means the drill can operate at twelve to twenty-five times its 12.70 mm diameter, so chip evacuation becomes critical beyond that range.

How much heat and noise does the coolant-fed Twister Xd drill generate during continuous all-day operation?

Coolant fed through the tool flushes chips and carries heat away, keeping the cutting zone cooler and noise lower than non-coolant drills in sustained use.

What machine spindle and coolant system are required to run the 12.70 mm Twister Xd drill?

A rigid machine spindle that accepts a 12.70 mm shank and a through-spindle coolant system capable of delivering pressure and flow for deep-hole drilling are needed.

More in Power Drills, Drivers & Cutting Bits

Similar items