M.A. Ford CDACR2031 Cyclone Aluminium 5X 2 Flute Coolant Drill
A 5× diameter coolant-fed drill with two flutes for aluminium, model 2031
- Designed for aluminium with 5x diameter reach
- Two-flute geometry improves chip evacuation in soft metal
- Coolant-fed design reduces heat during deep holes
- New condition ensures full factory performance
- California Proposition 65 warning applies to this item
M.A. Ford Cyclone Aluminium Drill
The M.A. Ford CDACR2031 is a coolant-fed drill built for aluminium machining. Its 5× diameter length and two-flute geometry suit production runs where chip evacuation and hole accuracy matter. Machinists working on CNC centres or dedicated drilling units will find it matches high-speed aluminium workflows.
Coolant-Fed Two-Flute Design
Internal coolant delivery flushes chips from deep holes without peck cycles, cutting cycle time on 5× depth holes. The two-flute layout balances chip space and core strength so the drill resists deflection in soft, gummy aluminium alloys. Operators see straighter holes and longer tool life versus external-coolant drills.
Solid Carbide Build Quality
Solid carbide construction holds edge sharpness through abrasive aluminium-silicon alloys. The shank fits standard hydraulic or shrink-fit holders for run-out below five microns. No flats or whistle-notch features are present, so collet clamping must be uniform. The tool carries a Proposition 65 warning for chemicals known to California to cause cancer and reproductive harm.
How it compares
Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.
- Price $97.99
- Pricier than about 56% of the 2,412 comparable items (median $81.99).
Specifications
| Product | |
|---|---|
| Brand name | M.A. FORD |
Questions about this item
How often should the coolant-fed channels on the CDACR2031 be flushed to prevent clogging?
Flush the coolant passages after each extended drilling session to clear aluminium chips and residue, then inspect the two flute openings for blockage before the next use.
What wear limit appears first when running the Cyclone drill continuously in aluminium?
The cutting edges on the two flutes dull before the shank or coolant ports show wear, so monitor hole quality and replace the drill when edge rounding reduces chip evacuation.
How much heat builds up in the CDACR2031 during all-day production drilling?
The internal coolant feed carries heat away from the cutting zone, keeping the tool body near ambient temperature even during sustained high-speed operation in aluminium.
More in Power Drills, Drivers & Cutting Bits
Similar items
YINGHUA
YINGHUA 5 pieces 3.175X25 One Flute UP DOWN Cut Spiral Carbide Mill Tool Cutters fastener
- Right-Angle Drills
$97.99
0.00118509BTC
In stock
YINGHUA
YINGHUA 10PCS Single Flute UP Spiral Cutter 6x22x45mm
- Right-Angle Drills
$119.99
0.00145115BTC
In stock