We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
M.A. Ford Cyclone drill bit for aluminum with two flutes and coolant feed

M.A. Ford

M.A. Ford CDACRM0620 Cyclone Drill for Aluminum 5X 2 Flute Coolant Fed

SKU CH-V830-ZPJZJ

Drills aluminium efficiently with a 5x diameter reach, two-flute design and through-coolant feed

  • Designed for aluminium with 5X diameter reach
  • Two-flute geometry clears chips efficiently in soft metal
  • Coolant-fed design delivers fluid to the cutting zone
  • M.A. Ford quality built for professional workshop use
  • California Proposition 65 warning applies to this product

Cyclone Drill for Aluminum 5X

The M.A. Ford CDACRM0620 Cyclone Drill is a coolant-fed cutting tool built for high-efficiency aluminium machining. Its two-flute geometry and 5× diameter reach suit CNC operators and job-shop technicians who need deep-hole capability in non-ferrous materials. The design targets chip evacuation and heat control in production environments.

5× reach with coolant feed

The 5× length-to-diameter ratio provides extended reach for deep features while the internal coolant channel delivers fluid directly to the cutting zone. This combination supports higher feed rates and longer tool life in aluminium alloys, though the two-flute layout limits chip space in extremely deep or high-volume roughing passes where a three-flute design would offer more clearance.

Upgrade from standard twist drills

Shops moving from conventional external-coolant twist drills gain deeper straight holes and reduced peck cycles on vertical and horizontal machining centres. The step is worthwhile when hole depth exceeds three diameters and coolant-through spindle capability exists; it is not for manual drilling, handheld tools, or materials other than aluminium.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $147.99
Pricier than about 70% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

Will the 5X flute length work with my existing toolholder and spindle setup?

The drill has a 5X flute design and coolant-fed construction, so verify your toolholder accommodates the flute length and your spindle delivers coolant through the tool.

How can I confirm the coolant-fed channels are flowing properly after installation?

Run a test cycle with coolant on and watch for steady flow from the drill tip; consistent chip evacuation and hole quality indicate the internal passages are clear.

Does the CDACRM0620 come with any collets, clamps or coolant adapters in the package?

Only the cyclone drill itself is supplied; collets, clamping hardware and any required coolant adapters must be sourced separately.

More in Power Drills, Drivers & Cutting Bits

Similar items