M.A. Ford CDACRM0870 Cyclone Drill for Aluminum 5x 2 Flute Coolant Fed

M.A. Ford Cyclone Drill for Aluminum

The M.A. Ford CDACRM0870 Cyclone Drill is built for aluminum machining with a 5x length and two flutes. Coolant-fed design helps clear chips and control temperature during deep-hole work. New condition ensures full tool life from the first cut. Suited for CNC and manual operations that demand reach and chip evacuation.

Best for deep aluminum holes with through-coolant

Shops drilling aluminum at 5x diameter depth will benefit from the flute geometry and internal coolant path. Operations without through-spindle coolant cannot use the feed feature and should look elsewhere. Buyers needing carbide grades for steel, titanium or hardened alloys must select a different tool. The Prop 65 notice also applies for California compliance.

Sustained cutting with coolant flow

Under continuous load the two flutes and coolant channel work together to evacuate chips and reduce heat buildup. Steady coolant pressure maintains consistent chip removal at depth without peck cycles. Tool life remains stable when feed and speed match aluminum parameters. Overheating risk drops compared with non-coolant drills at the same 5x depth.