We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
M.A. Ford Cyclone drill bit for aluminum, 5X 2 flute coolant fed design

M.A. Ford

M.A. Ford CDACRM1050 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed

SKU CH-HTP8-1APN0

A coolant-fed cyclone drill for aluminium with two flutes and 5X reach

  • Optimised for aluminium with a 5×D reach
  • Two-flute geometry improves chip evacuation in soft metals
  • Coolant-fed design delivers fluid directly to the cutting zone
  • Cyclone series engineering targets high-speed aluminium drilling
  • New condition ensures full factory performance from first use

Cyclone Drill for Aluminium

The M.A. Ford CDACRM1050 is a 5X diameter carbide drill with two flutes and through-coolant delivery. It is engineered for high-performance drilling in aluminium and other non-ferrous materials where chip evacuation and heat control are critical. The design targets machine shops and production cells that need consistent hole quality at elevated feed rates.

Suited for CNC aluminium work

This tool suits operators running rigid CNC machines with through-spindle coolant capability who drill deep holes in wrought or cast aluminium. It is not for manual drilling, handheld tools or machines without coolant pressure. Buyers who need to drill steel, titanium or hardened alloys should select a different geometry and coating optimised for those materials.

5X diameter with coolant feed

The defining specification is the 5X length-to-diameter ratio combined with internal coolant channels. This pairing enables deep-hole drilling in a single pass while flushing chips and managing temperature in aluminium. If the application requires a shorter 3X tool or lacks through-coolant supply, this drill will not perform as intended.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $252.99
Pricier than about 85% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

What shank style does the CDACRM1050 need in my tool holder?

The drill uses a standard cylindrical shank that fits common ER collets, Weldon flats or hydraulic chucks sized for the tool diameter.

Will the 5× length reach through my existing fixture clamps?

The 5× flute length extends the cutting zone well beyond typical clamp heights, so the flutes stay clear of the workpiece face.

How do I confirm coolant is reaching the tip on the CDACRM1050?

Watch for a steady stream exiting the two flute holes at the point; pressure should match the machine spec for 5× carbide drills.

More in Power Drills, Drivers & Cutting Bits

Similar items