We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver twist drill bit with two parallel flutes and a pointed tip

M.A. Ford

M.A. Ford CXDCL3750AP Cyclone Xd 8X Coolant Fed Double Margin Drill

SKU CH-EBRZ-XXAJ9

Coolant-fed double-margin drill with 8× diameter depth capability for 3/8 inch and 9.52 mm holes

  • 8X diameter drilling depth reaches deep holes
  • Coolant-fed design delivers fluid to the cutting zone
  • Double-margin geometry improves hole straightness and finish
  • 3/8 inch and 9.52 mm diameter covers imperial and metric needs
  • New condition ensures full factory performance

Cyclone Xd 8X Drill 3/8 Inch

The M.A. Ford CXDCL3750AP is a solid-carbide drill built for production drilling in steel and high-temperature alloys. Its 8× diameter flute length and through-coolant design evacuate chips from deep holes without peck cycles. The double-margin geometry keeps the tool centred for straight, accurate bores in CNC machining centres.

For High-Volume Deep-Hole Work

Shops running unattended cycles in tough materials gain consistent hole quality and longer tool life from the coolant-fed design. Operations without through-spindle coolant or that only drill shallow holes in soft metals will not use the 8× length or internal channels effectively.

3/8 Inch (9.52 mm) Cutting Diameter

The drill cuts a 9.52 mm hole; the machine spindle must accept a 3/8 inch shank and deliver coolant through the tool. Verify both the holder capacity and the coolant-pressure rating before ordering.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $271.99
Pricier than about 87% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

What drill-point standard does the Cyclone Xd 8X follow, and what diameter does that limit?

The CXDCL3750AP is a 3/8 inch (9.52 mm) double-margin drill, so the point geometry is fixed to that diameter and cannot be used for larger holes.

What shank style does the CXDCL3750AP have, and what holder does it require?

It uses a straight cylindrical shank matched to the 3/8 inch body, so it must be clamped in a precision collet or hydraulic chuck that accepts 9.52 mm.

How is the coolant fed through this drill, and what setup step is often missed?

Coolant travels through internal channels to the tip; the machine’s through-spindle coolant must be activated and filtered, otherwise the drill will run dry.

More in Power Drills, Drivers & Cutting Bits

Similar items