We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver cylindrical drill bit with fluted shaft and coolant hole

M.A. Ford

M.A. Ford CXDCLM1250AP Cyclone Xd 12.50 mm Coolant Fed Double Margin Drill

SKU CH-EEP4-ZA9EJ

12.50 mm coolant-fed double-margin drill with 8X Cyclone Xd geometry for deep-hole accuracy

  • 50 mm diameter suits precise hole-making
  • coolant-fed design clears chips during deep drilling
  • double-margin construction improves hole straightness
  • Cyclone Xd geometry supports 8x diameter reach
  • new condition ensures full factory performance

M.A. Ford CXDCLM1250AP Cyclone Xd Drill

The M.A. Ford CXDCLM1250AP is a 12.50 mm coolant-fed double margin drill built for precision holemaking. It belongs to the Cyclone Xd range and carries an 8X designation for extended reach applications. The tool is supplied new and ships directly from the manufacturer.

Machinists drilling deep, accurate holes in metal

This drill suits machinists who need coolant-through capability and double-margin stability for deep-hole work in metal. It is not intended for hand-held use or for jobs that do not require through-coolant delivery. Buyers without a compatible coolant-fed spindle should look at alternative tooling.

12.50 mm diameter with 8X reach

The defining specification is the 12.50 mm cutting diameter combined with the 8X length-to-diameter ratio. This determines the maximum hole depth achievable in a single pass and the spindle clearance required. Verify that your machine setup matches this diameter and reach before ordering.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $593.99
Pricier than about 92% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

Will the 12.50 mm diameter work with my existing 12.5 mm drill chuck?

Yes, 12.50 mm and 12.5 mm are the same size, so the shank will fit your chuck without an adapter.

How can I confirm the coolant-fed channels are flowing correctly after installation?

Run the machine at low speed with coolant on; steady flow from both margins and no pressure drop means the internal passages are clear.

Does the box include coolant fittings or only the drill body?

Only the 12.50 mm Cyclone Xd drill body is supplied; coolant fittings, tubing and holders must be purchased separately.

More in Power Drills, Drivers & Cutting Bits

Similar items