We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver twist drill bit with double margin flutes and coolant hole, quarter inch diameter

M.A. Ford

M.A. Ford Cyclone Xd 3X Coolant Fed Double Margin Drill 1/4

SKU CH-0B72-TF2PA

Coolant-fed double-margin drill for 1/4 inch holes, 3× diameter depth, Prop 65 listed

  • Cyclone Xd design for high-performance drilling
  • 3X coolant-fed system improves chip evacuation
  • Double margin construction enhances hole accuracy
  • 1/4 inch diameter suits precision applications
  • New condition ensures full factory performance

Drill size and coolant feed

The M.A. Ford Cyclone Xd drill has a 1/4 inch diameter and uses internal coolant channels. It is built for machining operations that need chip evacuation through the tool. The double margin design supports hole straightness during the cut. This tool targets professional metalworking shops.

Suited for high-precision holes

Shops that need accurate holes in tough alloys with through-coolant capability will find this drill suitable. Buyers who need a larger diameter or a non-coolant design should look at something else. The 3X length is not intended for deep-hole applications beyond its flute reach. Hand-held drilling is not the intended use.

California Proposition 65 notice

This product carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm. The notice references code 65 and applies to the item as supplied. Buyers who require documentation free of such substances must verify compliance before purchase. The warning is a regulatory requirement for this listing.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $103.99
Pricier than about 58% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

How deep can the 1/4 inch Cyclone Xd 3X drill go before chip evacuation becomes the limiting factor?

The 3X diameter design with coolant feed and double margins supports stable drilling to roughly three times the diameter, so chip removal stays effective within that depth range.

What heat or noise level should I expect when running this coolant-fed drill continuously in production?

Coolant delivery through the tool flushes heat from the cutting zone, keeping tip temperature lower and reducing the high-pitched squeal common in dry deep-hole drilling.

Which tool-holder interface does the CXDCS2500AP shank require for secure clamping?

The straight round shank fits standard ER collets, Weldon flats or hydraulic holders that accept a 1/4 inch diameter, so existing CNC tooling can clamp it directly.

More in Power Drills, Drivers & Cutting Bits

Similar items