M.A. Ford Cyclone Xd 3X Coolant Fed Double Margin Drill 5.10mm

Cyclone Xd 5.10mm Coolant-Fed Drill

The M.A. Ford Cyclone Xd is a solid-carbide drill with a 5.10mm diameter and a 3× diameter flute length. Coolant-fed channels run through the tool body to deliver lubricant directly to the cutting edges. Double-margin geometry improves hole straightness and surface finish in deep-hole applications. It is built for high-performance drilling in steels and difficult alloys.

Suited for CNC deep-hole drilling

This drill suits machine shops running CNC centres that have through-spindle coolant capability and need accurate holes at 3× diameter depth. It is not for hand-held drilling, machines without coolant feed, or jobs requiring longer reach or larger diameters than 5.10mm. The Prop 65 notice also means it is not for buyers who must avoid listed chemicals entirely.

Sustained cutting with internal coolant flow

Under continuous load the internal coolant passages flush chips and control temperature at the cutting zone, preventing built-up edge and thermal damage. The double margins maintain guidance and roundness throughout the full 3× depth without wandering. Stable torque and consistent hole quality are maintained cycle after cycle in production runs.