We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical 6.10 mm drill bit with double margin and coolant holes

M.A. Ford

M.A. Ford Cyclone Xd 3X Coolant Fed Double Margin Drill 6.10 mm

SKU CH-4M6M-X948K

Coolant-fed double-margin drill cuts 6.10 mm holes with 3X diameter depth capacity

  • 10 mm diameter suits precise hole sizes
  • 3X coolant-fed design improves chip evacuation
  • double margin construction enhances hole straightness
  • M.A. Ford brand signals professional-grade tooling
  • California Prop 65 warning informs safe handling

Cyclone Xd 6.10 mm Coolant-Fed Drill

This M.A. Ford Cyclone Xd drill is a 6.10 mm solid-carbide tool with internal coolant feed and a double-margin design. It targets machine shops and production cells that need precise, deep holes in tough alloys. The 3× diameter flute length supports stable chip evacuation in steel, stainless steel and high-temperature alloys.

For high-precision drilling.

The double margins and through-coolant channels suit CNC operators who hold tight diameter tolerances and need reliable cooling at depth. Hand-held drilling, soft materials or shallow-hole jobs will not use the geometry or coolant capability. Buyers who want a larger diameter or a longer flute length should look at a different size in the range.

6.10 mm diameter decides fit

The cutting diameter is exactly 6.10 mm, so the hole size and tool-holder clearance are fixed by that figure. Verify the spindle interface and coolant-pressure capability of your machine before ordering. The Prop 65 notice also applies to this item.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $122.99
Pricier than about 63% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

Will the 6.10 mm drill fit my existing 6 mm collet?

The 6.10 mm shank is slightly larger than a standard 6 mm collet and will not seat correctly in it. Use a collet or holder sized for 6.10 mm.

How can I verify coolant is flowing through the drill after installation?

Start the machine at low speed and watch for a steady stream exiting the two coolant holes at the drill tip. No flow means a blockage or loose connection.

Does the box include collets or coolant fittings?

The package contains only the Cyclone Xd 6.10 mm drill. Collets, holders and coolant-line fittings are sold separately.

More in Power Drills, Drivers & Cutting Bits

Similar items