We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small 3.00 mm drill bit with double margin and coolant feed

M.A. Ford

M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 3.00mm

SKU CH-JBXN-93S9N

A 3.00 mm coolant-fed double-margin drill designed for 8× diameter depth drilling

  • Coolant-fed design improves chip evacuation for deeper holes
  • Double-margin geometry enhances hole straightness and finish
  • 00 mm diameter suits precise drilling applications
  • 8× diameter capability extends reach in tough materials
  • Cyclone Xd series built for high-performance drilling

Cyclone Xd 8X Coolant Fed Drill

The M.A. Ford Cyclone Xd is a coolant fed double margin drill built for precision hole making. Its 3.00 mm diameter suits applications that require accurate small bores. The tool is supplied new and ships directly from the manufacturer.

Coolant fed operation constraints

Coolant fed designs need a machine spindle and holder that can deliver fluid through the tool. Without through coolant capability the drill cannot evacuate chips or control heat at its intended depth. Shops without that infrastructure cannot use this drill as designed.

3.00 mm diameter decides fit

The single specification that determines suitability is the 3.00 mm cutting diameter. If the hole size or pilot requirement differs from this value the drill will not produce the required feature. Verify the exact diameter before ordering.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $128.99
Pricier than about 65% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

What does the 8X coolant-fed double margin design mean for drilling performance?

The 8X coolant-fed double margin design delivers coolant directly to the cutting zone while the double margins guide the drill for straighter holes and improved surface finish in deep-hole applications.

How does the 3.00 mm diameter perform in a real machine setup?

At 3.00 mm the drill produces precise small-diameter holes with consistent chip evacuation when run at recommended speeds and feeds for the workpiece material.

Which shank interface does this drill use and what does it limit?

The drill uses a standard cylindrical shank that fits common drill chucks and collets, limiting use to holders that accept round shanks of this diameter.

More in Power Drills, Drivers & Cutting Bits

Similar items