We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small silver metal drill bit with fluted shaft and pointed tip

M.A. Ford

M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 4.30mm

SKU CH-NZ0S-0Q66S

Coolant-fed double-margin drill, 4.30 mm diameter, 8×D depth capability

  • 8X diameter reach for deep-hole drilling
  • coolant-fed design clears chips from the cut
  • double-margin construction improves hole straightness
  • 30 mm diameter suits precise metric work
  • new condition ensures full factory performance

Cyclone Xd 8X Coolant Fed Drill

The M.A. Ford Cyclone Xd is a solid carbide drill with internal coolant channels and double margins. It is built for production environments that require deep, accurate holes in difficult materials. Machinists gain a tool that reduces cycle time while holding tight tolerances.

Sustained load behaviour

Internal coolant delivery flushes chips continuously during 8× diameter drilling. Double margins maintain hole straightness and surface finish when the cut runs long. The design resists deflection and thermal buildup that would degrade a standard drill under the same conditions.

Practical limits of the interface

The 4.30 mm diameter fixes the hole size and the matching coolant-hole geometry. Shank dimensions follow the manufacturer standard for this series, so holder compatibility is limited to that specification. Operators must verify machine spindle coolant pressure meets the drill’s minimum requirement.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $156.99
Pricier than about 72% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

How much heat does the 4.30 mm drill generate during continuous coolant-fed operation?

The internal coolant channels carry fluid directly to the cutting zone, removing heat as the double-margin design maintains hole straightness during extended drilling cycles.

What tool-holder and coolant system are required to run the CXDCLM0430AP?

A machine spindle with through-coolant capability and a compatible 4.30 mm collet or hydraulic holder are needed to supply pressurised coolant through the drill body.

Will the 8X diameter flute length fit in the same tool magazine as my older 5X drills?

The longer flute increases overall tool length, so magazine pocket depth must be checked; the shank diameter remains standard for the 4.30 mm size.

More in Power Drills, Drivers & Cutting Bits

Similar items