We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical silver drill bit with double margin flutes and central coolant hole

M.A. Ford

M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 7.00mm

SKU CH-FEH0-NREB5

A coolant-fed double-margin drill with 8× diameter depth capacity for 7.00 mm holes

  • Cyclone Xd design optimised for 8×D drilling depth
  • Coolant-fed channels deliver fluid directly to the cutting zone
  • Double-margin geometry improves hole straightness and surface finish
  • 00 mm diameter suits precise metric holemaking
  • Manufactured by M.A. Ford for professional power-drill applications

7.00 mm Coolant-Fed Drill for Deep-Hole Work

The M.A. Ford Cyclone Xd 8X is a double-margin drill designed for 8× diameter depth in a single pass. Internal coolant channels deliver fluid directly to the cutting zone for chip evacuation and temperature control. It targets CNC operators and job-shop machinists who need reliable deep-hole performance in steel and alloy materials.

Double Margin Design Improves Hole Quality

Two precision-ground margins guide the tool evenly, reducing walk and improving roundness at depth. Coolant-fed construction means the machine must supply through-spindle or through-holder coolant; dry or flood-only setups cannot use this drill. The 7.00 mm diameter suits metric tap-drill charts and reamer-ready finishes without intermediate steps.

Replaces Conventional Twist Drills and Gun Drills

Shops moving from peck-drilling standard twist drills or outsourcing gun-drill work gain cycle-time savings and in-house control. The step is worthwhile when hole depth exceeds 5× diameter and coolant-through capability exists on the machine. Buyers without through-coolant spindles or who only drill shallow holes will not benefit from this geometry.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $199.99
Pricier than about 79% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

What does the 8X coolant-fed design mean for the 7.00 mm drill?

The 8X designation indicates the flute length allows drilling up to eight times the diameter, while internal coolant channels deliver fluid directly to the cutting edges for heat control and chip evacuation.

What shank style does the Cyclone Xd 7.00 mm drill use for tool-holder fit?

It uses a standard cylindrical shank with a double-margin lands that provides guidance and stability in a conventional drill chuck or collet holder.

How is the drill installed in a CNC machine and what step is often missed?

Secure the cylindrical shank in a precision collet or hydraulic holder, then verify coolant pressure is activated before spindle start — skipping the coolant-on check is the common error.

More in Power Drills, Drivers & Cutting Bits

Similar items