We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal twist drill bit with double margin flutes and coolant holes, 9.50 mm diameter

M.A. Ford

M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 9.50 mm

SKU CH-K1GG-A1521

A coolant-fed double-margin drill with 8× diameter depth capability for 9.50 mm holes

  • 50 mm diameter handles medium-sized holes
  • 8× diameter reach drills deep in one pass
  • Coolant-fed design clears chips and reduces heat
  • Double-margin geometry improves hole straightness and finish
  • Cyclone Xd series built for high-performance drilling

Cyclone Xd 8X Drill 9.50 mm

The M.A. Ford Cyclone Xd is a coolant-fed double-margin drill with an 8× diameter flute length. Its 9.50 mm cutting diameter suits precision metalworking tasks that demand deep-hole accuracy and consistent chip evacuation. Professional machinists and CNC operators use it for high-efficiency drilling in demanding alloys.

Coolant-fed double-margin design

Internal coolant delivery flushes chips from the cutting zone while the double margins stabilise the tool in the hole. This combination reduces heat build-up, improves surface finish and extends tool life during extended production runs. The geometry targets tighter tolerances than standard drills can hold.

Suited for deep-hole CNC drilling

Ideal for shops running dedicated coolant-through spindles on tough materials where hole straightness and finish are critical. Not suited for hand-held drilling, machines without through-spindle coolant, or applications needing diameters other than 9.50 mm.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $294.99
Pricier than about 90% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

How often should the double-margin flutes on the 9.50 mm Cyclone Xd 8X drill be inspected and replaced?

Inspect the double-margin flutes after each shift; replace the drill when margin wear affects hole accuracy or coolant flow.

What limits continuous drilling depth with the 8X coolant-fed design?

The 8X diameter-to-length ratio sets the maximum drilling depth before chip evacuation becomes difficult.

How much heat and noise does the 9.50 mm drill generate during all-day production runs?

Coolant fed through the tool carries heat away from the cutting zone, reducing thermal buildup and operational noise during extended use.

More in Power Drills, Drivers & Cutting Bits

Similar items