We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
M.A. Ford HPDCR 0330A Twister HPD coolant drill 5X 3.30 mm

M.A. Ford

M.A. Ford HPDCR 0330A Twister HPD coolant drill 5X 3.30 mm

SKU CH-SHT1-D1YCE

A 3.30 mm coolant-fed drill bit designed for high-performance drilling

  • 5× flute coolant drill clears chips fast
  • 30 mm diameter drills precise small holes
  • New M.A. Ford tool delivers reliable performance
  • California Prop 65 warning lists cancer risk chemical
  • California Prop 65 warning lists reproductive harm chemical

Application fit

The M.A. Ford HPDCR 0330A Twister HPD coolant drill is a 3.30 mm high-performance cutting tool designed for machine-based drilling where through-coolant delivery is required. It suits production engineers and CNC operators who need reliable hole quality in tough alloys.

Upgrade path

This drill replaces standard non-coolant or lower-pressure drills when chip evacuation becomes the limiting factor. The jump is worth it when cycle times suffer from Peck drilling or when tool life drops due to heat buildup in deep holes.

Build integration

The shank fits standard ER collets and hydraulic holders used on modern machining centres. Through-spindle coolant capability frees up external nozzle positioning and reduces the need for secondary chip-clearing operations.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $50.99
Cheaper than about 61% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

What shank diameter does the 3.30 mm drill need in the chuck?

The drill has a 3.30 mm cutting diameter and requires a chuck that accepts a 3.30 mm shank for proper fit.

How do I enable coolant flow when installing this Twister HPD drill?

Connect the machine's through-spindle coolant supply to the drill's internal channels before tightening the holder to ensure fluid reaches the cutting zone.

When should the 3.30 mm drill be replaced based on wear?

Replace the drill when flank wear reaches the manufacturer's limit or when hole diameter exceeds tolerance, typically after the rated tool life for the material being cut.

More in Power Drills, Drivers & Cutting Bits

Similar items