We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
M.A. Ford Twister HPD coolant drill, 5.30 mm silver steel twist bit with fluted shaft

M.A. Ford

M.A. Ford HPDCR 0530A Twister HPD Coolant Drill 5.30mm

SKU CH-Z6J9-SJV7W

A 5.30 mm diameter coolant-fed drill bit for high-performance drilling applications

  • 30 mm diameter for precise hole sizing
  • Twister HPD design for high-performance drilling
  • Coolant-through capability for extended tool life
  • 5x length ratio for deeper reach
  • M.A. Ford quality for reliable results

M.A. Ford Twister HPD Coolant Drill 5.30mm

The M.A. Ford Twister HPDCR 0530A is a coolant-fed high-performance drill with a 5.30 mm cutting diameter. It is engineered for production drilling in tough alloys where through-tool coolant delivery improves chip evacuation and tool life. The 5X diameter design suits deep-hole applications in CNC machining centres.

Machinists drilling deep holes in stainless steel

This drill suits CNC operators who need reliable coolant-through performance at 5.30 mm diameter for deep-hole work. It is not for manual drilling, handheld tools or machines without through-spindle coolant capability. Buyers needing a different diameter or a non-coolant drill should select another tool.

5.30 mm coolant-through diameter

The 5.30 mm cutting diameter combined with internal coolant channels is the specification that determines fit. Verify the machine spindle accepts through-coolant and that the holder matches the shank before ordering. The tool carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $66.99
Cheaper than about 55% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

What size collet or chuck do I need to hold the 5.30 mm shank of this HPDCR 0530A drill?

You need a collet or drill chuck that accepts a 5.30 mm diameter shank; the drill’s shank is ground to that exact size for a secure grip in standard tool holders.

Will the coolant-through channels in this Twister HPD drill work with my existing flood-coolant setup on an older CNC machine?

Yes, the internal coolant passages feed cutting fluid to the drill point, and they function with conventional flood or through-spindle coolant systems already on the machine.

How can I confirm the 5.30 mm Twister HPD drill is cutting correctly after installation?

Check for consistent chip evacuation, steady spindle load, and a clean hole finish at the expected diameter; these indicate the coolant-fed drill is performing as designed.

More in Power Drills, Drivers & Cutting Bits

Similar items