We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver twist drill bit with coolant channels, 7.50 mm diameter

M.A. Ford

M.A. Ford HPDCR 0750A Twister HPD Coolant Drill 5X 7.50 mm

SKU CH-S3DM-TSHVQ

A 7.50 mm coolant-fed drill designed for high-performance drilling applications

  • Twister HPD design enables high-performance coolant drilling
  • 5X diameter capability allows deeper holes in single pass
  • 50 mm diameter suits precise machining applications
  • M.A. Ford brand delivers professional cutting tool quality
  • California Proposition 65 warning indicates chemical safety awareness

Product Identity

The M.A. Ford HPDCR 0750A is a Twister HPD coolant drill designed for high-performance drilling tasks. It features a 7.50 mm diameter and a 5X length ratio for extended reach in demanding applications.

Suitable Users

This drill suits machinists who require internal coolant delivery for deep-hole drilling in tough materials. Buyers who need a different diameter, a shorter flute length, or a non-coolant drill should look at other options.

Setup Checks

Verify that your machine spindle can accommodate the 7.50 mm shank and that the coolant system provides adequate pressure and flow. Confirm the 5X length fits within your work envelope and tool changer limits.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $74.99
Typical for this category: the median of 2,412 items is $81.99.

Specifications

Product
Brand nameM.A. FORD

Questions about this item

What drill chuck size is required for the 7.50 mm shank on this Twister HPD coolant drill?

A chuck that accepts at least 7.50 mm diameter is needed to hold the shank securely.

Can the Twister HPD coolant drill be used with a standard non-coolant drill press?

Yes, it fits a standard chuck, but the internal coolant passages will not be pressurised without a through-spindle coolant system.

How can I confirm the drill is cutting correctly after installation?

Check for consistent chip evacuation through the coolant holes and measure the hole diameter against the 7.50 mm specification.

More in Power Drills, Drivers & Cutting Bits

Similar items